Skip to Main Content U.S. Department of Energy
Applied Materials & Manufacturing Group banner

Recent Publications

278 publications found:

2020

  • Overman N.R., S. Jana, D.P. Field, C.A. Lavender, and V.V. Joshi. 2020. "An Electron Backscatter Diffraction Analysis of Grain Boundary Initiated Discontinuous Precipitation in U-10Mo." Journal of Nuclear Materials 529. PNNL-SA-140310. doi:10.1016/j.jnucmat.2019.151940
  • Wang T., S.A. Whalen, P. Upadhyay, and K.S. Kappagantula. 2020. "Joining Dissimilar Materials via Rotational Hammer Riveting Technique." In Magnesium Technology 2020, edited by J. Brian, et al, 207-212. New York, New York:Springer Nature. PNNL-SA-147128. doi:10.1007/978-3-030-36647-6_32

2019

  • Al-Majali Y.A., C.T. Chirume, E.P. Marcum, O.A. Daramola, K.S. Kappagantula, and J.P. Trembly. 2019. "Coal-Filler-Based Thermoplastic Composites as Construction Materials: A New Sustainable End-Use Application." ACS Sustainable Chemistry & Engineering 7, no. 19:16870-16878. PNNL-SA-145861. doi:10.1021/acssuschemeng.9b04453
  • Devaraj A., W. Wang, V.R. Vemuri, L. Kovarik, X. Jiang, M.E. Bowden, and J.R. Trelewicz, et al. 2019. "Grain Boundary Segregation and Intermetallic Precipitation in Coarsening Resistant Nanocrystalline Aluminum Alloys." Acta Materialia 165. PNNL-SA-135423. doi:10.1016/j.actamat.2018.09.038
  • Frazier W.E., S. Hu, N.R. Overman, R. Prabhakaran, C.A. Lavender, and V.V. Joshi. 2019. "Recrystallization Kinetics of Cold-Rolled U-10 wt% Mo." Journal of Nuclear Materials 513. PNNL-SA-137816. doi:10.1016/j.jnucmat.2018.10.046
  • Jana S., A.L. Schemer-Kohrn, N.R. Overman, L.E. Sweet, E.J. Kautz, C.A. Lavender, and V.V. Joshi. 2019. Eutectoid Transformation in U10Mo Alloy: Effect of Deformation History and Homogenization Heat Treatment. PNNL-28519. Richland, WA: Pacific Northwest National Laboratory. Eutectoid Transformation in U10Mo Alloy: Effect of Deformation History and Homogenization Heat Treatment
  • Jana S., N.R. Overman, A. Devaraj, L.E. Sweet, C.A. Lavender, and V.V. Joshi. 2019. "Discontinuous Precipitation in U-10 wt.%Mo Alloy: Reaction Kinetics, Effect of Prior gamma-UMo Microstructure, the Role of Grain-Boundary Misorientation, and the Effect of Ternary Alloying Addition." JOM. The Journal of the Minerals, Metals and Materials Society 71, no. 8:2770-2779. PNNL-SA-141543. doi:10.1007/s11837-019-03588-4
  • Jiang X., N.R. Overman, N.L. Canfield, and K.A. Ross. 2019. "Friction stir processing of dual certified 304/304L austenitic stainless steel for improved cavitation erosion resistance." Applied Surface Science 471. PNNL-SA-138166. doi:10.1016/j.apsusc.2018.11.177
  • Li X., N.R. Overman, T.J. Roosendaal, M.J. Olszta, C. Zhou, H. Wang, and T.A. Perry, et al. 2019. "Microstructure and mechanical properties of pure copper wire produced by shear assisted processing and extrusion." JOM. The Journal of the Minerals, Metals and Materials Society 71, no. 12:4799–4805. PNNL-SA-147051. doi:10.1007/s11837-019-03752-w
  • Shin Y., M.N. Taufique, R. Devanathan, E.C. Cutsforth, J. Lee, W. Liu, and L.S. Fifield, et al. 2019. "Highly Selective Supported Graphene Oxide Membranes for Water-Ethanol Separation." Scientific Reports 9, no. 1:Article No. 2251. PNNL-SA-130472. doi:10.1038/s41598-019-38485-y

2018

  • Aalseth C.E., N. Abgrall, E. Aguayo, S.I. Alvis, M. Amman, I.J. Arnquist, and F.T. Avignone, et al. 2018. "Search for Neutrinoless Double-ß Decay in 76Ge with the Majorana Demonstrator." Physical Review Letters 120, no. 13:Article No. 132502. PNNL-SA-130088. doi:10.1103/PhysRevLett.120.132502
  • Badwe N., X. Chen, D.K. Schreiber, M.J. Olszta, N.R. Overman, E.K. Karasz, and A.Y. Tse, et al. 2018. "Decoupling the role of stress and corrosion in the intergranular cracking of noble-metal alloys." Nature Materials 17, no. 10:887-893. PNNL-SA-138538. doi:10.1038/s41563-018-0162-x
  • Darsell J.T., N.R. Overman, V.V. Joshi, S. Mathaudhu, and S.A. Whalen. 2018. "Shear Assisted Processing and Extrusion (ShAPE) of AZ91E Flake: A Study of Tooling Features and Processing Effects." Journal of Materials Engineering and Performance 27, no. 8:4150-4161. PNNL-SA-129883. doi:10.1007/s11665-018-3509-1
  • Devaraj A., E.J. Kautz, L. Kovarik, S. Jana, N.R. Overman, C.A. Lavender, and V.V. Joshi. 2018. "Phase transformation of metastable discontinuous precipitation products to equilibrium phases in U10Mo alloys." Scripta Materialia 156. PNNL-SA-134393. doi:10.1016/j.scriptamat.2018.07.010
  • Frazier W.E., S. Hu, N.R. Overman, C.A. Lavender, and V.V. Joshi. 2018. "Short communication on Kinetics of grain growth and particle pinning in U-10 wt.% Mo." Journal of Nuclear Materials 498. PNNL-SA-128215. doi:10.1016/j.jnucmat.2017.10.041
  • Hardy J.S., C.A. Coyle, J.F. Bonnett, J.W. Templeton, N.L. Canfield, D.J. Edwards, and S.M. Mahserejian, et al. 2018. "Evaluation of Cation Migration in Lanthanum Strontium Cobalt Ferrite Solid Oxide Fuel Cell Cathodes via In-operando X-ray Diffraction." Journal of Materials Chemistry A 6, no. 4:1787-1801. PNNL-SA-127796. doi:10.1039/c7ta06856e
  • Jayaraman T.V., V.M. Meka, X. Jiang, N.R. Overman, J. Doyle, J.E. Shield, and S. Mathaudhu. 2018. "Investigation of structural and magnetic properties of rapidly-solidified iron-silicon alloys at ambient and elevated temperatures." Journal of Alloys and Compounds 741. PNNL-SA-129202. doi:10.1016/J.JALLCOM.2018.01.088
  • Nguyen B., C.H. Henager, N.R. Overman, and R.J. Kurtz. 2018. "A Multiscale Microstructural Approach to Ductile-Phase Toughened Tungsten for Plasma-Facing Materials." Journal of Nuclear Materials 508. PNNL-SA-131463. doi:10.1016/j.jnucmat.2018.05.048
  • Overman N.R., X. Jiang, R.K. Kukkadapu, T. Clark, T.J. Roosendaal, G.W. Coffey, and J.E. Shield, et al. 2018. "Physical and electrical properties of melt-spun Fe-Si (3–8 wt%) soft magnetic ribbons." Materials Characterization 136. PNNL-SA-129219. doi:10.1016/j.matchar.2017.12.019
  • Reza E Rabby M., K.A. Ross, N.R. Overman, M.J. Olszta, M. Mcdonnell, and S.A. Whalen. 2018. "Joining Thick Section Aluminum to Steel with Suppressed FeAl Intermetallic Formation via Friction Stir Dovetailing." Scripta Materialia 148. PNNL-SA-131279. doi:10.1016/j.scriptamat.2018.01.026
  • Riley B.J., C.H. Henager, D.W. Matson, N.R. Overman, and D.A. Pierce. 2018. Flux-assisted CdTe and CdSe growth using an in-situ dynamic flux removal process. PNNL-SA-124478. Richland, WA: Pacific Northwest National Laboratory. Flux-assisted CdTe and CdSe growth using an in-situ dynamic flux removal process

2017

  • Abgrall N., E. Aguayo, F.T. Avignone, A. Barabash, F. Bertrand, A.W. Bradley, and V. Brudanin, et al. 2017. "Muon Flux Measurements at the Davis campus of the Sanford Underground Research Facility with the Majorana Demonstrator veto system." Astroparticle Physics 93. PNNL-SA-107386. doi:10.1016/j.astropartphys.2017.01.013
  • Dogdibegovic E., N.S. Alabri, C.J. Wright, J.S. Hardy, C.A. Coyle, S.A. Horlick, and W. Guan, et al. 2017. "Activity and Stability of (Pr1-xNdx)2NiO4 as Cathodes for Solid Oxide Fuel Cells: Part V. In Situ Studies of Phase Evolution." Journal of the Electrochemical Society 164, no. 12:F1115-F1121. PNNL-SA-127512. doi:10.1149/2.1041707jes
  • Fifield L.S., Y. Shin, and K.L. Simmons. 2017. "Non-Destructive Evaluation of Polyolefin Thermal Aging Using Infrared Spectroscopy." In Nondestructive Characterization and Monitoring of Advanced Materials, Aerospace, and Civil Infrastructure 2017. Proceedings of the SPIE, edited by H. Felix Wu; Andrew L. Gyekenyesi; Peter J. Shull; Tzu-Yang Yu, 10169, 101690U. Bellingham, Washington:SPIE. PNNL-SA-125251. doi:10.1117/12.2261983
  • Henager C.H., W. Setyawan, T.J. Roosendaal, N.R. Overman, B.A. Borlaug, E.L. Stevens, and K.B. Wagner, et al. 2017. "DUCTILE-PHASE TOUGHENED TUNGSTEN FOR PLASMA-FACING MATERIALS IN FUSION REACTORS." International Journal of Powder Metallurgy 53, no. 2:53-69. PNNL-SA-122073.
  • Jana S., N.R. Overman, T. Varga, C.A. Lavender, and V.V. Joshi. 2017. "Phase Transformation Kinetics in Rolled U-10 wt. % Mo Foil: Effect of Post-rolling Heat Treatment and Prior ?-UMo Grain Size." Journal of Nuclear Materials 496. PNNL-SA-127108. doi:10.1016/j.jnucmat.2017.09.030
  • Jiang W., J. Zhang, D.J. Edwards, N.R. Overman, Z. Zhu, L. Price, and J. Gigax, et al. 2017. "Nanostructural Evolution and Behavior of H and Li in Ion-Implanted Gamma-LiAlO2." Journal of Nuclear Materials 494. PNNL-SA-124540. doi:10.1016/j.jnucmat.2017.07.048
  • Jiang W., M.A. Conroy, K. Kruska, N.R. Overman, T.C. Droubay, J. Gigax, and L. Shao, et al. 2017. "Nanoparticle Precipitation in Irradiated and Annealed Ceria Doped with Metals for Emulation of Spent Fuels." Journal of Physical Chemistry C 121, no. 40:22465-22477. PNNL-SA-126918. doi:10.1021/acs.jpcc.7b06188
  • Jiang X., S.A. Whalen, J.T. Darsell, S. Mathaudhu, and N.R. Overman. 2017. "Friction Consolidation of Gas-Atomized Fe-Si Powders for Soft Magnetic Applications." Materials Characterization 123. PNNL-SA-120598. doi:10.1016/j.matchar.2016.11.026
  • Johnson K.I., M.J. Veenstra, D.W. Gotthold, K.L. Simmons, K.J. Alvine, B. Hobein, and D. Houston, et al. 2017. "Advancements and Opportunities for On-board 700 bar Compressed Hydrogen Tanks in the Progression towards the Commercialization of Fuel Cell Vehicles." SAE International Journal of Alternative Powertrains 6, no. 2:201-218. PNNL-SA-122239. doi:10.4271/2017-01-1183
  • LU Z., S. Darvish, J.S. Hardy, J.W. Templeton, J.W. Stevenson, and Y. Zhong. 2017. "SrZrO3 Formation at the Interlayer/Electrolyte Interface During (La1-xSrx)1-dCo1-yFeyO3 Cathode Sintering." Journal of the Electrochemical Society 164, no. 10:F3097-F3103. PNNL-SA-127510. doi:10.1149/2.0141710jes
  • Nandipati G., X. Jiang, V.S. Vemuri, S. Mathaudhu, and A. Rohatgi. 2017. "Self-Learning Kinetic Monte Carlo Simulations of Diffusion in Ferromagnetic a-Fe-Si alloys." Journal of Physics: Condensed Matter 30, no. 3:Article No. 035903. PNNL-SA-124267. doi:10.1088/1361-648X/aa9774
  • Nguyen H.P., J.S. Hardy, C.A. Coyle, Z. LU, and J.W. Stevenson. 2017. "Developing Cost-Effective Dense Continuous SDC Barrier Layers for SOFCs." In ECS Transactions, 75, 107-114. Pennington, New Jersey:Electrochemical Society. PNNL-SA-131600. doi:10.1149/07542.0107ecst
  • Overman N.R., S.A. Whalen, M.E. Bowden, M.J. Olszta, K. Kruska, T. Clark, and E.L. Stevens, et al. 2017. "Homogenization and Texture Development in Rapidly Solidified AZ91E Consolidated by Shear Assisted Processing and Extrusion (ShAPE)." Materials Science and Engineering. A. Structural Materials: Properties, Microstructure and Processing 701. PNNL-SA-122981. doi:10.1016/j.msea.2017.06.062
  • Whalen S.A., V.V. Joshi, N.R. Overman, D.D. Caldwell, C.A. Lavender, and T. Skszek. 2017. "Scaled-Up Fabrication of Thin-Walled ZK60 Tubing using Shear Assisted Processing and Extrusion (ShAPE)." In Magnesium Technology Conference 2017, February 26 - March 2, 2017, San Diego, California, edited by KN Solanki, et al, 315-321. Cham:Springer. PNNL-SA-121164. doi:10.1007/978-3-319-52392-7_45

2016

  • Abgrall N., I.J. Arnquist, F.T. Avignone, H.O. Back, A.S. Barabash, F. Bertrand, and M. Boswell, et al. 2016. "The MAJORANA Demonstrator Radioassay Program." Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment 828. PNNL-SA-115634. doi:10.1016/j.nima.2016.04.070
  • Brooks K.P., K.J. Alvine, K.I. Johnson, N.A. Klymyshyn, R.P. Pires, E. Ronnebro, and K.L. Simmons, et al. 2016. PNNL Development and Analysis of Material-Based Hydrogen Storage Systems for the Hydrogen Storage Engineering Center of Excellence. PNNL-25234. Richland, WA: Pacific Northwest National Laboratory. PNNL Development and Analysis of Material-Based Hydrogen Storage Systems for the Hydrogen Storage Engineering Center of Excellence
  • Byun T., Y. Yang, N.R. Overman, and J.T. Busby. 2016. "Thermal Aging Phenomena in Cast Duplex Stainless Steels." JOM. The Journal of the Minerals, Metals and Materials Society 68, no. 2:507-516. PNNL-SA-111668. doi:10.1007/s11837-015-1709-9
  • Devanathan R., D.G. Chase-Woods, Y. Shin, and D.W. Gotthold. 2016. "Molecular Dynamics Simulations Reveal that Water Diffusion between Graphene Oxide Layers is Slow." Scientific Reports 6. PNNL-SA-117768. doi:10.1038/srep29484
  • Fifield L.S., Y. Shin, W. Liu, and D.W. Gotthold. 2016. "Scalable Production Method for Graphene Oxide Water Vapor Separation Membranes." MRS Advances: Nanotechnology 1, no. 28:2091-2098. PNNL-SA-117497. doi:10.1557/adv.2016.485
  • Gotthold D.W., N. Browning, E. Jensen, A.G. Joly, and N.L. Canfield. 2016. Optically Stimulated Luminescence Based Optical Data Storage. PNNL-27989. Richland, WA: Pacific Northwest National Laboratory.
  • Nandipati G., N. Govind, A. Andersen, and A. Rohatgi. 2016. "Self-Learning Kinetic Monte Carlo Simulations of Al Diffusion in Mg." Journal of Physics: Condensed Matter 28, no. 15:Article No. 155001. PNNL-SA-111640. doi:10.1088/0953-8984/28/15/155001
  • Nune S.K., D. Lao, D.J. Heldebrant, J. Liu, M.J. Olszta, R.K. Kukkadapu, and L.M. Gordon, et al. 2016. "Anomalous Water Expulsion from Carbon-Based Rods at High Humidity." Nature Nanotechnology 11, no. 9:791-797. PNNL-SA-112991. doi:10.1038/nnano.2016.91
  • Overman N.R., S. Mathaudhu, J. Choi, T.J. Roosendaal, and S.G. Pitman. 2016. "Microstructure and Mechanical Properties of a Novel Rapidly Solidified, High-Temperature Al-Alloy." Materials Characterization 112. PNNL-SA-112327. doi:10.1016/j.matchar.2015.12.015
  • Prabhakaran R., J. Choi, E.V. Stephens, D. Catalini, C.A. Lavender, and A. Rohatgi. 2016. "Mechanical Characterization and Corrosion Testing of X608 Al Alloy." In Light Metals 2016, edited by E. Williams. 145-150. Hoboken, New Jersey:John Wiley & Sons, Inc. PNNL-SA-113866.
  • Schwenzer B., T.C. Kaspar, Y. Shin, and D.W. Gotthold. 2016. "Spectroscopic study of graphene oxide membranes exposed to ultraviolet light." Journal of Physical Chemistry C 120, no. 23:12559-12567. PNNL-SA-116704. doi:10.1021/acs.jpcc.6b03033
  • Shin Y., W. Liu, B. Schwenzer, S. Manandhar, D.G. Chase-Woods, M.H. Engelhard, and R. Devanathan, et al. 2016. "Graphene oxide membranes with high permeability and selectivity for dehumidification of air." Carbon 106. PNNL-SA-112915. doi:10.1016/j.carbon.2016.05.023
  • Whalen S.A., S. Jana, D. Catalini, N.R. Overman, and J. Sharp. 2016. "Friction Consolidation Processing of n-Type Bismuth-Telluride Thermoelectric Material." Journal of Electronic Materials 45, no. 7:3390-3399. PNNL-SA-114513.
  • Xu K., P.R. Hrma, J.A. Rice, M.J. Schweiger, B.J. Riley, N.R. Overman, and A.A. Kruger. 2016. "Conversion of Nuclear Waste to Molten Glass: Cold-Cap Reactions in Crucible Tests." Journal of the American Ceramic Society 99, no. 9:2964–2970. PNNL-SA-115889. doi:10.1111/jace.14310

2015

  • Abgrall N., E. Aguayo, F.T. Avignone, A.S. Barabash, F. Bertrand, M. Boswell, and V. Brudanin, et al. 2015. "The MAJORANA low-noise low-background front-end electronics." Physics Procedia 61. PNNL-SA-111627. doi:10.1016/j.phpro.2014.12.066
  • Abgrall N., E. Aguayo, F.T. Avignone, A.S. Barabash, F. Bertrand, V. Brudanin, and M. Busch, et al. 2015. "The MAJORANA Parts Tracking Database." Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment 779. PNNL-SA-105092. doi:10.1016/j.nima.2015.01.001
  • Blochwitz-Nimoth J., A. Bhandari, D. Boesch, C.R. Fincher, D.J. Gaspar, D.W. Gotthold, and M.T. Greiner, et al. 2015. OLED Fundamentals: Materials, Devices, and Processing of Organic Light-Emitting Diodes. Boca Raton, Florida:CRC Press/Taylor and Francis Group. PNNL-SA-106310.
  • Choi J., A. Rohatgi, M.T. Smith, and C.A. Lavender. 2015. "Process Development for Stamping Á-Pillar Covers with Aluminum." In Light Metals 2015: Proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2015 Annual Meeting & Exhibition, March 15-19, 2015, Orlando, Florida, edited by M Hyland, 197-202. Hoboken, New Jersey:John Wiley and Sons, Inc. PNNL-SA-105374. doi:10.1002/9781119093435.ch35
  • Cuesta C., N. Abgrall, E. Aguayo, F.T. Avignone, A.S. Barabash, F. Bertrand, and M. Boswell, et al. 2015. "Background Model for the Majorana Demonstrator." Physics Procedia 61. PNNL-SA-102048. doi:10.1016/j.phpro.2015.06.001
  • Cuesta C., N. Abgrall, I.J. Arnquist, F.T. Avignone, A.S. Barabash, F. Bertrand, and V. Brudanin, et al. 2015. "Status of the Majorana Demonstrator." Nuclear and Particle Physics Proceedings 265-266. PNNL-SA-107387. doi:10.1016/j.nuclphysbps.2015.06.019
  • Giovanetti G.K., N. Abgrall, E. Aguayo, F.T. Avignone, A.S. Barabash, F. Bertrand, and M. Boswell, et al. 2015. "A Dark Matter Search with MALBEK." Physics Procedia 61. PNNL-SA-102008. doi:10.1016/j.phpro.2014.12.014
  • Green M.P., N. Abgrall, E. Aguayo, F.T. Avignone, A. Barabash, F. Bertrand, and M. Boswell, et al. 2015. "The MAJORANA DEMONSTRATOR for 0?ßß: Current Status and Future Plans." Physics Procedia 61. PNNL-SA-102699. doi:10.1016/j.phpro.2014.12.038
  • Hardy J.S., J.W. Stevenson, P. Singh, M.K. Mahapatra, E.D. Wachsman, M. Liu, and K.R. Gerdes. 2015. Effects of Humidity on Solid Oxide Fuel Cell Cathodes. PNNL-24115. Richland, WA: Pacific Northwest National Laboratory. Effects of Humidity on Solid Oxide Fuel Cell Cathodes
  • Jiang W., C.H. Henager, T. Varga, H. Jung, N.R. Overman, C. Zhang, and J. Gou. 2015. "Diffusion of Ag, Au and Cs implants in MAX phase Ti3SiC2." Journal of Nuclear Materials 462. PNNL-SA-107242. doi:10.1016/j.jnucmat.2015.04.002
  • Kaspar T.C., M.E. Bowden, C.M. Wang, V. Shutthanandan, N.R. Overman, R.M. Van Ginhoven, and B.D. Wirth, et al. 2015. "Epitaxial Fe/Y2O3 interfaces as a model system for oxide-dispersion-strengthened ferritic alloys." Journal of Nuclear Materials 457. PNNL-SA-105513. doi:10.1016/j.jnucmat.2014.11.046
  • Mathaudhu S., and B.L. Boyce. 2015. "Thermal Stability: The Next Frontier for Nanocrystalline Materials." JOM. The Journal of the Minerals, Metals and Materials Society 67, no. 12:2785-2787. PNNL-SA-115364. doi:10.1007/s11837-015-1708-x
  • Mertens S., N. Abgrall, F.T. Avignone, A.S. Barabash, F. Bertrand, V. Brudanin, and M. Busch, et al. 2015. "MAJORANA Collaboration’s Experience with Germanium Detectors." Journal of Physics: Conference Series 606, no. 1:Article No. 012005. PNNL-SA-111593. doi:10.1088/1742-6596/606/1/012005
  • Overman N.R., C.T. Overman, D.J. Edwards, and E.W. Hoppe. 2015. "Mechanical Property Anisotropy in Ultra Thick Copper Electrodeposits." Applied Physics A, Materials Science and Processing 120, no. 3:1181-1187. PNNL-SA-105267. doi:10.1007/s00339-015-9298-6
  • Sevigny G.J., R.K. Motkuri, D.W. Gotthold, L.S. Fifield, A.P. Frost, and W. Bratton. 2015. SEPARATION OF TRITIATED WATER USING GRAPHENE OXIDE MEMBRANE. PNNL-24411. Richland, WA: Pacific Northwest National Laboratory. SEPARATION OF TRITIATED WATER USING GRAPHENE OXIDE MEMBRANE
  • Toloczko M.B., M.J. Olszta, N.R. Overman, and S.M. Bruemmer. 2015. "STRESS CORROSION CRACK GROWTH RESPONSE FOR ALLOY 152/52 DISSIMILAR METAL WELDS IN PWR PRIMARY WATER." In Proceedings of the 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, August 11-15, 2016, Asheville, North Carolina. Houston, Texas:NACE International. PNNL-SA-97399.
  • Upadhyay P., A. Rohatgi, E.V. Stephens, R.W. Davies, and D. Catalini. 2015. "HIGH-RATE FORMABILITY OF HIGH-STRENGTH ALUMINUM ALLOYS: A STUDY ON OBJECTIVITY OF MEASURED STRAIN AND STRAIN RATE." In Light Metals 2015: Proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2015 Annual Meeting & Exhibition, March 15-19, 2015, Orlando, Florida, edited by M Hyland, 327-332. Hoboken, New Jersey:John Wiley & Sons, Inc. PNNL-SA-105367. doi:10.1002/9781119093435.ch55
  • Upadhyay P., Y. Hovanski, L.S. Fifield, and K.L. Simmons. 2015. "FRICTION STIR LAP WELDING OF ALUMINUM - POLYMER USING SCRIBE TECHNOLOGY." In Friction Stir Welding and Processing VIII, March 15-19, 2015, Orlando, Florida, edited by RS Mishra, et al, 153-161. Hoboken, New Jersey:John Wiley & Sons, Inc. PNNL-SA-106300. doi:10.1002/9781119093343.ch17
  • Xu W., N. Abgrall, E. Aguayo, F.T. Avignone, A.S. Barabash, F. Bertrand, and M. Boswell, et al. 2015. "Testing the Ge Detectors for the MAJORANA Demonstrator." Physics Procedia 61. PNNL-SA-102131. doi:10.1016/j.phpro.2014.12.104
  • Xu W., N. Abgrall, F.T. Avignone, A.S. Barabash, F. Bertrand, V. Brudanin, and M. Busch, et al. 2015. "The MAJORANA DEMONSTRATOR: A Search for Neutrinoless Double-beta Decay of 76Ge." Journal of Physics: Conference Series 606, no. 1:Article No. 012004. PNNL-SA-112304. doi:10.1088/1742-6596/606/1/012004

2014

  • Abgrall N., E. Aguayo, F.T. Avignone, A. Barabash, F. Bertrand, M. Boswell, and M. Boswell, et al. 2014. "The MAJORANA DEMONSTRATOR Neutrinoless Double-Beta Decay Experiment." Advances in High Energy Physics 2014. PNNL-SA-101090. doi:10.1155/2014/365432
  • Brooks K.P., K.L. Simmons, and M.R. Weimar. 2014. "Systems Engineering of Chemical Hydrogen Storage, Pressure Vessel and Balance of Plant for Onboard Hydrogen Storage." In 2014 Progress Report for the DOE Hydrogen and Fuel Cells Program. 30-35. Washington Dc:U.S. Department of Energy. PNNL-23498.
  • Brooks K.P., R.P. Pires, and K.L. Simmons. 2014. "Development and Validation of a Slurry Model for Chemical Hydrogen Storage in Fuel Cell Applications." Journal of Power Sources 271. PNNL-SA-103265. doi:10.1016/j.jpowsour.2014.07.186
  • Brooks K.P., T. Semelsberger, K.L. Simmons, and B.A. Van Hassel. 2014. "Slurry-Based Chemical Hydrogen Storage Systems for Automotive Fuel Cell Applications." Journal of Power Sources 268. PNNL-SA-102109. doi:10.1016/j.jpowsour.2014.05.145
  • Choi Y., E. Ronnebro, S.D. Rassat, A.J. Karkamkar, G.D. Maupin, J.D. Holladay, and K.L. Simmons, et al. 2014. "Kinetics Study of Solid Ammonia Borane Hydrogen Release – Modeling and Experimental Validation for Chemical Hydrogen Storage." Physical Chemistry Chemical Physics. PCCP 16, no. 17:7959-7968. PNNL-SA-93992. doi:10.1039/C3CP55280B
  • Cui J., J. Choi, G. Li, E. Polikarpov, J.T. Darsell, N.R. Overman, and M.J. Olszta, et al. 2014. "Thermal Stability of MnBi Magnetic Materials." Journal of Physics: Condensed Matter 26, no. 6:Article No. 064212. PNNL-SA-97263. doi:10.1088/0953-8984/26/6/064212
  • Finnerty P., P. Finnerty, E. Aguayo, M. Amman, F.T. Avignone, A.S. Barabash, and P.J. Barton, et al. 2014. "The Majorana Demonstrator: Progress towards showing the feasibility of a 76Ge neutrinoless double-beta decay experiment." In 18th International Symposium on Particles Strings and Cosmology (PASCOS 2012), June 3-8, 2012, Merida, Mexico. Journal of Physics: Conference Series, 485, Paper No. 012042. Philadelphia, Pennsylvania:Institute of Physics. PNNL-SA-101382. doi:10.1088/1742-6596/485/1/012042
  • Henager C.H., W.D. Bennett, A.L. Doherty, E.S. Fuller, J.S. Hardy, and R.P. Omberg. 2014. Corrosion Report for the U-Mo Fuel Concept. PNNL-23592. Richland, WA: Pacific Northwest National Laboratory. Corrosion Report for the U-Mo Fuel Concept
  • Hoppe E.W., C.E. Aalseth, O.T. Farmer, T.W. Hossbach, M. Liezers, H.S. Miley, and N.R. Overman, et al. 2014. "Reduction of Radioactive Backgrounds in Electroformed Copper for Ultra-Sensitive Radiation Detectors." Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment 764. PNNL-SA-100820. doi:10.1016/j.nima.2014.06.082
  • Martin R.D., N. Abgrall, E. Aguayo, F.T. Avignone, A.S. Barabash, F. Bertrand, and M. Boswell, et al. 2014. "Status of the MAJORANA DEMONSTRATOR experiment." In WORKSHOP ON DARK MATTER, NEUTRINO PHYSICS AND ASTROPHYSICS CETUP 2013: VII International Conference on Interconnections between Particle Physics and Cosmology (PPC), June 24-26, 2013, Lead/Deadwood, South Dakota. AIP Conference Proceedings, edited by B Szczerbinska, et al, 1604, Paper No. 413. Melville, New York:AIP. PNNL-SA-100893. doi:10.1063/1.4883459
  • Nguyen B.N., S.E. Sanborn, K.L. Simmons, R.N. Mathur, M.D. Sangid, X. Jin, and F. Costa, et al. 2014. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY 2014 First Quarterly Report. PNNL-23139. Richland, WA: Pacific Northwest National Laboratory. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY 2014 First Quarterly Report
  • Overman N.R., M.B. Toloczko, M.J. Olszta, and S.M. Bruemmer. 2014. "STRAIN CORRELATIONS IN ALLOY 690 MATERIALS USING ELECTRON BACKSCATTER DIFFRACTION AND VICKERS HARDNESS." In Corrosion 2014, March 9-13, 2014, San Antonio, Texas, Paper No. NACE-2014-4453. Houston, Texas:NACE International. PNNL-SA-99738.
  • Riley B.J., M.J. Schweiger, D. Kim, W.W. Lukens, B.D. Williams, C. Iovin, and C.P. Rodriguez, et al. 2014. "Iodine Solubility in Low-Activity Waste Borosilicate Glass at 1000 °C." Journal of Nuclear Materials 452, no. 1-3:178-188. PNNL-SA-100866. doi:10.1016/j.jnucmat.2014.04.027
  • Rohatgi A., A. Soulami, E.V. Stephens, R.W. Davies, and M.T. Smith. 2014. "An Investigation of Enhanced Formability in AA5182-O Al During High-Rate Fre-Forming at Room-Temperature: Quantification of Deformation History." Journal of Materials Processing Technology 214, no. 3:722–732. PNNL-SA-87055. doi:10.1016/j.jmatprotec.2013.07.015
  • Rohatgi A., R.W. Davies, E.V. Stephens, A. Soulami, and M.T. Smith. 2014. "An Experimental and Modeling Investigation on High-Rate Formability of Aluminum." In Light Metals 2014, February 16-20, 2014, San Diego, California, edited by J Grandfield, 219-225. Hoboken, New Jersey:John Wiley & Sons. PNNL-SA-98651. doi:10.1002/9781118888438.ch38
  • Simmons K.L., L.S. Fifield, M.P. Westman, and J.A. Roberts. 2014. New Technologies for Repairing Aging Cables in Nuclear Power Plants: M3LW-14OR0404015 Cable Rejuvenation Report. PNNL-23606. Richland, WA: Pacific Northwest National Laboratory. New Technologies for Repairing Aging Cables in Nuclear Power Plants: M3LW-14OR0404015 Cable Rejuvenation Report
  • Simmons K.L., P. Ramuhalli, A.F. Pardini, M.S. Prowant, L.S. Fifield, J.R. Tedeschi, and A.M. Jones, et al. 2014. "Determining Remaining Useful Life of Aging Cables in Nuclear Power Plants using Non-destructive Evaluation." In 2014 ANS Winter Meeting and Nuclear Technology Expo, November 9-13, 2014, Anaheim, CA. Transactions of the American Nuclear Society, 111, 456-458. La Grange Park, Illinois:American Nuclear Society. PNNL-SA-104772.
  • Szanyi J., A.M. Karim, L.R. Pederson, J. Kwak, D. Mei, D.N. Tran, and D.R. Herling, et al. 2014. "Investigation of Mixed Oxide Catalysts for NO Oxidation." In FY 2014 Progress Report for Advanced Combustion Engine Research and Development, edited by G Singh. III-25 - III-29. Washington, Dc:US Department of Energy, Energy Efficiency and Renewable Energy, Vehicle Technologies Office. PNNL-24151.
  • Zhang K., X.S. Li, W. Li, A. Rohatgi, Y. Duan, P. Singh, and L. Li, et al. 2014. "Phase Transfer-Catalyzed Fast CO2 Absorption by MgO-Based Absorbents with High Cycling Capacity." Advanced Materials Interfaces 1, no. 3:Article No. 1400030. PNNL-SA-98809. doi:10.1002/admi.201400030

2013

  • Aguayo E., F.T. Avignone, H.O. Back, A.S. Barabash, J. Beene, M. Bergevin, and M. Bergevin, et al. 2013. "The Majorana Double Beta Decay Experiment: Present Status." In Particle Physics at the Tercentenary of Mikhail Lomonosov, Proceedings of the Fifteenth Lomonosov Conference on Elementary Particle Physics, August 18-24, 2011, Moscow, Russia, edited by AI Studenikin, 164-168. Hackensack, New Jersey:World Scientific. PNNL-SA-105131. doi:10.1142/9789814436830_0035
  • Aguayo Navarrete E., M. Amman, F.T. Avignone, A. Barabash, P.J. Barton, J. Beene, and F. Bertrand, et al. 2013. "Characteristics of Signals Originating Near the Lithium-Diffused N+ Contact of High Purity Germanium P-Type Point Contact Detectors." Nuclear Instruments and Methods in Physics Research. Section A, Accelerators, Spectrometers, Detectors and Associated Equipment 701. PNNL-SA-94073. doi:10.1016/j.nima.2012.11.004
  • Clayton D.A., S. Bakhtiari, C.M. Smith, K.L. Simmons, P. Ramuhalli, J.B. Coble, and D.L. Brenchley, et al. 2013. "Research and Development Roadmaps for Nondestructive Evaluation of Cables, Concrete, Reactor Pressure Vessels, and Piping Fatigue." In Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security, March 10, 2013, San Diego, California. Proceedings of the SPIE, edited by TY Yu, et al, 8694, Paper No. 869426. Bellingham, Washington:Society of Photo-Optical Instrumentation Engineers. PNNL-SA-93524. doi:10.1117/12.2010061
  • Crum J.V., D.M. Strachan, A. Rohatgi, and M.R. Zumhoff. 2013. "Epsilon Metal Waste Form for Immobilization of Noble Metals from Used Nuclear Fuel." Journal of Nuclear Materials 441, no. 1-3:103-112. PNNL-SA-100524. doi:10.1016/j.jnucmat.2013.05.043
  • Hoppe E.W., N.R. Overman, and B.D. LaFerriere. 2013. "Evaluation of Ultra-Low Background Materials for Uranium and Thorium Using ICP-MS." In Proceedings of the IV International Workshop in Low Radioactivity Techniques (LRT2013), April 10-12, 2013, Assergi, Italy. AIP Conference Proceedings, edited by L Miramonti and L Pandola, 1549, 58-65. Melville, New York:AIP Publishing. PNNL-SA-96462. doi:10.1063/1.4818076
  • Keeter K., K. Keeter, N. Abgrall, E. Aguayo, F.T. Avignone, A. Barabash, and F. Bertrand, et al. 2013. "THE MAJORANA DEMONSTRATOR: OVERVIEW AND STATUS UPDATE." In Proceedings of the South Dakota Academy of Science, edited by R Tatina, et al, 92, 7-11. Vermillion, South Dakota:South Dakota Academy of Sciences. PNNL-SA-100976.
  • Nguyen B.N., and K.L. Simmons. 2013. "A Multiscale Modeling Approach to Analyze Filament-Wound Composite Pressure Vessels." Journal of Composite Materials 47, no. 17:2113-2123. PNNL-SA-76934. doi:10.1177/0021998312454508
  • Nguyen B.N., and K.L. Simmons. 2013. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY13 Fourth Quarterly Report. PNNL-22938. Richland, WA: Pacific Northwest National Laboratory. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY13 Fourth Quarterly Report
  • Nguyen B.N., and K.L. Simmons. 2013. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY13 Third Quarterly Report. PNNL-22621. Richland, WA: Pacific Northwest National Laboratory. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - FY13 Third Quarterly Report
  • Nguyen B.N., and K.L. Simmons. 2013. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - Quarterly Report. PNNL-22301. Richland, WA: Pacific Northwest National Laboratory. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites - Quarterly Report
  • Nguyen B.N., and K.L. Simmons. 2013. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites. PNNL-22473. Richland, WA: Pacific Northwest National Laboratory. Predictive Engineering Tools for Injection-Molded Long-Carbon-Fiber Thermoplastic Composites
  • Overman N.R., E.W. Hoppe, and R.S. Addleman. 2013. "Surface Cleaning Techniques: Ultra-Trace ICP-MS Sample Preparation and Assay of HDPE." Journal of Radioanalytical and Nuclear Chemistry 296, no. 3:1303-1310. PNNL-SA-90977. doi:10.1007/s10967-012-2301-1
  • Rohatgi A., and K.I. Johnson. 2013. "Investigation of H2 Diaphragm Compressors to Enable Low-Cost Long-Life Operation." In FY 2013 Progress Report for the DOE Hydrogen and Fuel Cells Program. III-53 - III-55. Oak Ridge, Tennessee:US Department of Energy. PNNL-22718.
  • Rohatgi A., E.V. Stephens, R.W. Davies, and M.T. Smith. 2013. "AN INVESTIGATION OF SHEET METAL DEFORMATION BEHAVIOR DURING ELECTRO-HYDRAULIC FORMING (EHF)." In ASME 2013 Manufacturing Science and Engineering Conference (MSEC 2013), June 10-14, 2013, Madison, Wisconsin, 1, V001T01A011 Paper No. MSEC2013-1129. New York, New York:ASME. PNNL-SA-92085. doi:10.1115/MSEC2013-1129
  • Simmons K.L., L.S. Fifield, and M.P. Westman. 2013. New Technologies for Repairing Aging Cables in Nuclear Power Plants. PNNL-22775. Richland, WA: Pacific Northwest National Laboratory. New Technologies for Repairing Aging Cables in Nuclear Power Plants
  • Simmons K.L., L.S. Fifield, M.P. Westman, P. Ramuhalli, A.F. Pardini, J.R. Tedeschi, and A.M. Jones. 2013. Determining Remaining Useful Life of Aging Cables in Nuclear Power Plants – Interim Study FY13. PNNL-22812. Richland, WA: Pacific Northwest National Laboratory. Determining Remaining Useful Life of Aging Cables in Nuclear Power Plants – Interim Study FY13
  • Toloczko M.B., M.J. Olszta, N.R. Overman, and S.M. Bruemmer. 2013. "OBSERVATIONS AND IMPLICATIONS OF INTERGRANULAR STRESS CORROSION CRACK GROWTH OF ALLOY 152 WELD METALS IN SIMULATED PWR PRIMARY WATER." In Proceedings of the 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, August 11-15, 2013, Asheville, North Carolina. Houston, Texas:NACE International. PNNL-SA-97397.
  • Wei X., Z. Nie, Q. Luo, B. Li, B. Chen, K.L. Simmons, and V.L. Sprenkle, et al. 2013. "Nanoporous Polytetrafluoroethylene/Silica Composite Separator as a High-Performance All-Vanadium Redox Flow Battery Membrane." Advanced Energy Materials 3, no. 9:1215-1220. PNNL-SA-91588. doi:10.1002/aenm.201201112
  • Weimar M.R., L.A. Chick, D.W. Gotthold, and G.A. Whyatt. 2013. Cost Study for Manufacturing of Solid Oxide Fuel Cell Power Systems. PNNL-22732. Richland, WA: Pacific Northwest National Laboratory. Cost Study for Manufacturing of Solid Oxide Fuel Cell Power Systems
  • Williams J.J., J. Walters, M. Wang, N. Chawla, and A. Rohatgi. 2013. "Extracting Constitutive Stress-Strain Behavior of Microscopic Phases by Micropillar Compression." JOM. The Journal of the Minerals, Metals and Materials Society 65, no. 2:226-233. PNNL-SA-90972. doi:10.1007/s11837-012-0516-9

2012

  • Aalseth C.E., R. Bonicalzi, M.G. Cantaloub, A.R. Day, L.E. Erikson, J.E. Fast, and J.B. Forrester, et al. 2012. "A Shallow Underground Laboratory for Low-Background Radiation Measurements and Materials Development." Review of Scientific Instruments 83, no. 11:Article No. 113503. PNNL-SA-89084. doi:10.1063/1.4761923
  • Devarakonda M.N., D.R. Herling, D. Kim, J. Kwak, C.H. Peden, M.L. Stewart, and A. Strzelec, et al. 2012. "CLEERS Aftertreatment Modeling and Analysis." In FY 2011 Progress Report for Advanced Combustion Engine Research and Development: Energy Efficiency and Renewable Energy Vehicle Technologies Program, edited by G Singh. 176-181. Washington Dc:US Department of Energy. PNNL-20935.
  • Edwards D.J., R.M. Ermi, A.L. Schemer-Kohrn, N.R. Overman, C.H. Henager, D. Burkes, and D.J. Senor. 2012. Characterization of U-Mo Foils for AFIP-7. PNNL-21990. Richland, WA: Pacific Northwest National Laboratory. Characterization of U-Mo Foils for AFIP-7
  • Giovanetti G.K., E. Aguayo, F.T. Avignone, H.O. Back, A.S. Barabash, J. Beene, and M. Bergevin, et al. 2012. "Dark matter sensitivities of the Majorana Demonstrator." Journal of Physics: Conference Series 375. PNNL-SA-102006. doi:10.1088/1742-6596/375/1/012014
  • Hardy J.S., J.W. Templeton, and J.W. Stevenson. 2012. "IN-SITU XRD OF OPERATING LSFC CATHODES: DEVELOPMENT OF A NEW ANALYTICAL CAPABILITY." In Advances in Solid Oxide Fuel Cells, edited by P Singh, et al, VIII. Hoboken, New Jersey:John Wiley & Sons, Inc. PNNL-SA-84857. doi:10.1002/9781118217481.ch7
  • Hardy J.S., J.W. Templeton, D.J. Edwards, Z. Lu, and J.W. Stevenson. 2012. "Lattice Expansion of LSCF-6428 Cathodes Measured by In-situ XRD during SOFC Operation." Journal of Power Sources 198. PNNL-SA-82491. doi:10.1016/j.jpowsour.2011.09.099
  • Keillor M.E., C.E. Aalseth, A.R. Day, L.E. Erikson, B.D. Glasgow, E.W. Hoppe, and T.W. Hossbach, et al. 2012. "A Germanium Array for Sample Measurements: Recent Results and New Analysis Methods." In 2012 Monitoring Research Review: Ground-Based Nuclear Explosion Monitoring Technologies, September 18-20, 2012, Albuquerque, NM, II, 635-642. Washington D.C.:National Nuclear Security Administration. PNNL-SA-89692.
  • Lu Z., J.S. Hardy, J.W. Templeton, and J.W. Stevenson. 2012. "Extended reaction zone of La0.6Sr0.4Co0.2Fe0.8O3 cathode for solid oxide fuel cell." Journal of Power Sources 198. PNNL-SA-81201. doi:10.1016/j.jpowsour.2011.09.020
  • Lu Z., J.S. Hardy, J.W. Templeton, J.W. Stevenson, D. Fisher, N. Wu, and A. Ignatiev. 2012. "Performance of Anode-Supported Solid Oxide Fuel Cell with Thin Bi-Layer Electrolyte by Pulsed Laser Deposition." Journal of Power Sources 210. PNNL-SA-85923. doi:10.1016/j.jpowsour.2012.03.036
  • Overman N.R., C.T. Overman, T.A. Kafentzis, D.J. Edwards, and E.W. Hoppe. 2012. Majorana Electroformed Copper Mechanical Analysis. PNNL-21315. Richland, WA: Pacific Northwest National Laboratory. Majorana Electroformed Copper Mechanical Analysis
  • Phillips D., E. Aguayo Navarrete, F.T. Avignone, H.O. Back, A.S. Barabash, M. Bergevin, and M. Bergevin, et al. 2012. "The MAJORANA experiment: an ultra-low background search for neutrinoless double-beta decay." Journal of Physics: Conference Series 381, no. 1:Article No. 012044. PNNL-SA-83504. doi:10.1088/1742-6596/381/1/012044
  • Ren X., R. Qui, L.S. Fifield, K.L. Simmons, and K. li. 2012. "Effects of Surface Treatments on Mechanical Properties and Water Resistance of Kenaf Fiber-Reinforced Unsaturated Polyester Composites." Journal of Adhesion Science and Technology 26, no. 18-19:2277-2289. PNNL-SA-91410. doi:10.1163/156856111X623087
  • Rohatgi A., E.V. Stephens, D.J. Edwards, M.T. Smith, and R.W. Davies. 2012. "Electro-hydraulic forming of advanced high-strength steels: Deformation and microstructural characterization." In ASME Manufacturing Science and Engineering Conference (MSEC2012), June 4-8, 2012, Notre Dame, Indiana, 163-168. New York, New York:ASME. PNNL-SA-84265. doi:10.1115/MSEC2012-7322
  • Rohatgi A., E.V. Stephens, R.W. Davies, M.T. Smith, A. Soulami, and S. Ahzi. 2012. "Electro-Hydraulic Forming of Sheet Metals: Free-forming vs. Conical-die Forming." Journal of Materials Processing Technology 212, no. 5:1070-1079. PNNL-SA-82938. doi:10.1016/j.jmatprotec.2011.12.014
  • Schubert A.G., E. Aguayo, F.T. Avignone, C. Zhang, H.O. Back, A.S. Barabash, and M. Bergevin, et al. 2012. "The MAJORANA DEMONSTRATOR: A Search for Neutrinoless Double-beta Decay of Germanium-76." In 91th Particles and Nuclei International Conference (PANIC11), July 24-29, 2011, Cambridge, Massachusetts. AIP Conference Proceedings, edited by SG Steadman, GSF Stephans and FE Taylor, 1441, Article No. 480. Melville, New York:American Institute of Physics. PNNL-SA-101296. doi:10.1063/1.3700592
  • Simmons K.L., P. Ramuhalli, D.L. Brenchley, J.B. Coble, H. Hashemian, R. Konnik, and S. Ray. 2012. Light Water Reactor Sustainability (LWRS) Program – Non-Destructive Evaluation (NDE) R&D Roadmap for Determining Remaining Useful Life of Aging Cables in Nuclear Power Plants. PNNL-21731. Richland, WA: Pacific Northwest National Laboratory. Light Water Reactor Sustainability (LWRS) Program – Non-Destructive Evaluation (NDE) R&D Roadmap for Determining Remaining Useful Life of Aging Cables in Nuclear Power Plants
  • White H., J.E. Tanner, K. Allen, J.M. Benz, S. McOmish, and K.L. Simmons. 2012. "A Passive Tamper Indicating Enclosure For Use Within A Nuclear Weapons Monitoring Regime." In 53rd Annual Meeting of the Institute of Nuclear Materials Management (INMM 53), July 15-19, 2012, Orlando, Florida, 4, 2442-2451. Deerfield, Illinois:Institute of Nuclear Materials Management. PNNL-SA-88433.
  • Xu W., J.Z. Hu, M.H. Engelhard, S.A. Towne, J.S. Hardy, J. Xiao, and J. Feng, et al. 2012. "The Stability of Organic Solvents and Carbon Electrode in Nonaqueous Li-O2 Batteries." Journal of Power Sources 215. PNNL-SA-85748. doi:10.1016/j.jpowsour.2012.05.021

2011

  • Aguayo E., J.E. Fast, E.W. Hoppe, M.E. Keillor, J.D. Kephart, R.T. Kouzes, and B.D. LaFerriere, et al. 2011. "The Majorana Demonstrator." In Proceedings of the Meeting of the Division of Particles and Fields of the American Physical Society (DPF-2011), August 9-13, 2011, Providence, Rhode Island, edited by T Speer. College Park, Maryland:American Physical Society. PNNL-SA-102130.
  • Aguayo Navarrete E., F.T. Avignone, H.O. Back, A.S. Barabash, M. Bergevin, M. Bergevin, and F. Bertrand, et al. 2011. "The MAJORANA Experiment." In AIP Conference Proceedings: Workshop on Calculation of Double-Beta-Decay Matrix Elements (MEDEX `11), June 13-16, 2011, Prague, Czech Republic, 1417. Melville, New York:American Institute of Physics. PNNL-SA-87225. doi:10.1063/1.3671044
  • Choi D., J. Xiao, Y. Choi, J.S. Hardy, M. Vijayakumar, M.S. Bhuvaneswari, and J. Liu, et al. 2011. "Thermal Stability and Phase Transformation of Electrochemically Charged/Discharged LiMnPO4 Cathode for Li-Ion Battery." Energy & Environmental Science 4, no. 11:4560-4566. PNNL-SA-79713. doi:10.1039/C1EE01501J
  • Devarakonda M.N., R.G. Tonkyn, D.N. Tran, J.H. Lee, and D.R. Herling. 2011. "Modeling Species Inhibition of NO Oxidation in Urea-SCR Catalysts for Diesel Engine NOx Control." Journal of Engineering for Gas Turbines and Power. 133, no. 9:Article No. 092805. PNNL-SA-75345.
  • Hardy J.S., J.W. Templeton, Z. Lu, and J.W. Stevenson. 2011. "Development of SOFC Cathodes." In 2011 Office of Fossil Energy Fuel Cell Program Annual Report. 84-87. Washington, District Of Columbia:Department of Energy. PNNL-SA-80404.
  • Hardy J.S., J.W. Templeton, Z. Lu, and J.W. Stevenson. 2011. Enhanced Densification of SDC Barrier Layers. PNNL-20908. Richland, WA: Pacific Northwest National Laboratory. Enhanced Densification of SDC Barrier Layers
  • Lu Z., J.S. Hardy, J.W. Templeton, and J.W. Stevenson. 2011. "New insights in the polarization resistance of anode-supported solid oxide fuel cells with La0.6Sr0.4Co0.2Fe0.8O3 cathodes." Journal of Power Sources 196, no. 1:39-45. PNNL-SA-72791. doi:10.1016/j.jpowsour.2010.07.054
  • Miller S.D., J.M. Benz, J.E. Tanner, K.L. Simmons, J.D. Valencia, M.M. Conrady, and B.A. Greenfield. 2011. "Enhancing the Security of TIDs Using OSL." In Proceedings of the 52nd Annual Meeting of the Institute of Nuclear Materials Management 2011 (INMM 52), July 17-21, 2011, Palm Desert, CA, 5, 3937-3946. Deerfield, Illinois:Institute of Nuclear Materials Management. PNNL-SA-80559.
  • Qui R., X. Ren, L.S. Fifield, K.L. Simmons, and K. Li. 2011. "Hemp-Fiber-Reinforced Unsaturated Polyester Composites: Optimization of Processing and Improvement of Interfacial Adhesion." Journal of Applied Polymer Science 121, no. 2:862-868. PNNL-SA-70326. doi:10.1002/app.33674
  • Rohatgi A., and D.M. Strachan. 2011. AN INITIAL ASSESSMENT OF POTENTIAL PRODUCTION TECHNOLOGIES FOR EPSILON-METAL WASTE FORMS. PNNL-20313. Richland, WA: Pacific Northwest National Laboratory. AN INITIAL ASSESSMENT OF POTENTIAL PRODUCTION TECHNOLOGIES FOR EPSILON-METAL WASTE FORMS
  • Rohatgi A., E.V. Stephens, A. Soulami, R.W. Davies, and M.T. Smith. 2011. "Experimental Characterization of Sheet Metal Deformation During Electro-Hydraulic Forming." Journal of Materials Processing Technology 211, no. 11:1824-1833. PNNL-SA-78155. doi:10.1016/j.jmatprotec.2011.06.005
  • Templeton J.W., J.S. Hardy, Z. Lu, and J.W. Stevenson. 2011. "THE EFFECT OF A-SITE STOICHIOMETRY ON LSCF CATHODE PERFORMANCE AND STABILITY." In Advances in Solid Oxide Fuel Cells VII: Ceramic Engineering and Science Proceedings, 35th Conference on Advanced Ceramics and Composites, January 23-28, 2011, Daytona Beach, Florida, edited by NP Bansal, et al, 32. Hoboken, New Jersey:John Wiley & Sons, Inc. PNNL-SA-77313. doi:10.1002/9781118095249.ch5
  • Templeton J.W., Z. Lu, J.W. Stevenson, and J.S. Hardy. 2011. Effect of A-site Non-stoichiometry on LSCF Cathodes. PNNL-20902. Richland, WA: Pacific Northwest National Laboratory. Effect of A-site Non-stoichiometry on LSCF Cathodes
  • Wynn P., H. White, K. Allen, K.L. Simmons, P. Sliva, J.M. Benz, and J.E. Tanner. 2011. "Passive Tamper Indicating Enclosures Incorporating Embedded Optical Fibre." In Proceedings of the 52nd Annual Meeting of the Institute of Nuclear Materials Management, July 17-21, 2011, Palm Desert, California, 5, 4278-4187. Deerfield, Illinois:Institute of Nuclear Materials Management. PNNL-SA-80597.
  • Xu W., K. Xu, V.V. Viswanathan, S.A. Towne, J.S. Hardy, J. Xiao, and Z. Nie, et al. 2011. "Reaction Mechanisms for the Limited Reversibility of Li-O2 Chemistry in Organic Carbonate Electrolytes." Journal of Power Sources 196, no. 22:9631-9639. PNNL-SA-78429. doi:10.1016/j.jpowsour.2011.06.099

2010

  • Brooks K.P., M.N. Devarakonda, S.D. Rassat, D.A. King, and D.R. Herling. 2010. "SYSTEMS MODELING OF AMMONIA BORANE BEAD REACTOR FOR OFF-BOARD REGENERABLE HYDROGEN STORAGE IN PEM FUEL CELL APPLICATIONS." In Proceedings of the ASME 2010 Eighth International Fuel Cell Science, Engineering and Technology Conference (FuelCell2010), 1, 729-734. New York, New York:American Society of Mechanical Engineers. PNNL-SA-71490.
  • Devarakonda M.N., J.D. Holladay, K.P. Brooks, S.D. Rassat, and D.R. Herling. 2010. "Dynamic Modeling and Simulation Based Analysis of an Ammonia Borane (AB) Reactor System for Hydrogen Storage." ECS Transactions 33, no. 1:1959 - 1972. PNNL-SA-73748. doi:10.1149/1.3484687
  • Devarakonda M.N., R.G. Tonkyn, and D.R. Herling. 2010. "Hydrocarbon Effect on a Fe-zeolite Urea-SCR Catalyst: An Experimental and Modeling Study." In Diesel Exhaust Emission Control, SP-2287: SAE 2010 World Congress & Exhibition, April, 2010, Detroit, Michigan, Paper No.: 2010-01-1171. Warrendale, Pennsylvania:SAE International. PNNL-SA-68448. doi:10.4271/2010-01-1171
  • Devarakonda M.N., R.G. Tonkyn, D.N. Tran, J.H. Lee, and D.R. Herling. 2010. "MODELING COMPETITIVE ADSORPTION IN UREA-SCR CATALYSTS FOR EFFECTIVE LOW TEMPERATURE NOX CONTROL." In Proceedings of ASME 2010 International Mechanical Engineering Congress and Exposition (IMECE 2010), Paper No. IMECE 2010-39977. New York, New York:ASME. PNNL-SA-73460.
  • Devarakonda M.N., R.G. Tonkyn, D.N. Tran, J.H. Lee, and D.R. Herling. 2010. "Modeling Species Inhibition of NO oxidation in Urea-SCR Catalysts for Diesel Engine NOx Control." In Proceedings of the ASME 2010 Internal Combustion Engine Division Fall Technical Conference, Paper No. ICEF2010-35054. New York, New York:American Society of Mechanical Engineers. PNNL-SA-72137.
  • Fifield L.S., and K.L. Simmons. 2010. "COMPRESSION MOLDED, BIO-FIBER REINFORCED, HIGH PERFORMANCE THERMOSET COMPOSITES FOR STRUCTURAL AND SEMI-STRUCTURAL APPLICATIONS." In COMPOSITES: SHAPING NEW VEHICLES, 10th Annual Society of Plastics Engineers Automotive Composites Conference & Exhibition, September 15-16, 2010, Troy, Michigan. Newtown, Connecticut:Society of Plastics Engineers. PNNL-SA-74285.
  • Fifield L.S., C. Huang, and K.L. Simmons. 2010. "Investigation of Polymer Resin/Fiber Compatibility in Natural Fiber Reinforced Composite Automotive Materials." In 10th International Conference on Wood & Biofiber Plastic Composites. Madison, Wisconsin:Forest Products Society. PNNL-SA-67109.
  • Fifield L.S., K.L. Simmons, R. Battiste, C. Schutte, M.T. Smith, D. Houston, and L. Berger. 2010. "Evaluation of Composite Natural Fiber-Resin Compatibility." In 2009 Annual Progress Report: Lightweighting Materials. 8-77 - 8-85. Washington, Dc:US Department of Energy, Office of Energy Efficiency & Renewable Energy. PNNL-SA-70201.
  • Fifield L.S., K.L. Simmons, S. Laddha, and T.A. Kafentzis. 2010. "PERFORMANCE ENHANCEMENT OF COMPRESSION MOLDED KENAF FIBER REINFORCED VINYL ESTER COMPOSITES THROUGH RESIN ADDITIVE." In SAMPE 2010: New Materials and Processes for a New Economy 55th International SAMPE Symposium, May 17-20, 2010, Seattle, Washington, edited by K Nelson, A Yousefpour and SW Beckwith. Covina, California:Society for the Advancement of Material and Process Engineering. PNNL-SA-70709.
  • Miller S.D., J.E. Tanner, K.L. Simmons, M.M. Conrady, J.M. Benz, and B.A. Greenfield. 2010. "An Optically Stimulated Luminescence Uranium Enrichment Monitor." In Proceedings of the 51st Annual Meeting of the Institute of Nuclear Materials Management, July 11-15, 2010, Baltimore, Maryland. Deerfield, Illinois:INMM. PNNL-SA-73248.
  • Rohatgi A., E.V. Stephens, A. Soulami, R.W. Davies, and M.T. Smith. 2010. "High-Strain-Rate Forming of Aluminum and Steel Sheets for Automotive Applications." In Proceedings of the International Deep Drawing Group Conference (IDDRG-2010 ), May 31-June 02, 2010, Graz, Austria. Brussels:International Deep Drawing Research Group. PNNL-SA-71641.
  • Simmons K.L., L.S. Fifield, S. Laddha, F. Chen, and K.M. Wright. 2010. "EFFECT OF SODIUM HYDROXIDE AND SUPERCRITICAL FLUID TREATMENTS ON UNRETTED KENAF FIBERS." In SAMPE 2010: New Materials and Processes for a New Economy 55th International SAMPE Symposium, May 17-20, 2010, Seattle Washington, edited by K Nelson, A Yousefpour and SC Beckwith, Paper No. 66. Covina, California:Society for the Advancement of Material and Process Engineering. PNNL-SA-70867.
  • Westman M.P., L.S. Fifield, K.L. Simmons, S. Laddha, and T.A. Kafentzis. 2010. Natural Fiber Composites: A Review. PNNL-19220. Richland, WA: Pacific Northwest National Laboratory. Natural Fiber Composites: A Review

2009

  • Devarakonda M.N., D. Kim, J. Kwak, J.H. Lee, C.H. Peden, M.L. Stewart, and J. Szanyi, et al. 2009. "CLEERS Aftertreatment Modeling and Analysis." In FY 2009 Progress Report for Advanced Combustion Engine Research and Development. 155-163. Washington, D.C.:Energy Efficiency and Renewable Energy. PNNL-SA-69246.
  • Pilli S., K.L. Simmons, J.D. Holbery, V. Shutthanandan, P.B. Stickler, and L.V. Smith. 2009. "A Novel Accelerated Moisture Adsorption Test and Characterization." Composites. Part A, Applied science and manufacturing 40, no. 9:1501-1505. PNWD-SA-8451. doi:10.1016/j.compositesa.2009.06.008
  • Rohatgi A., D.R. Herling, and E.A. Nyberg. 2009. "CHARACTERIZATION AND FORMABILITY OF CONTINUOUS-CAST AZ31B MAGNESIUM ALLOY SHEETS." In Magnesium Technology 2010, edited by SR Agnew, NR Neelameggham, EA Nyberg and WH Sillekens, 573-578. Warrendale, Pennsylvania:TMS. PNNL-SA-68612.
  • Simmons K.L., D.T. Howe, S. Laddha, and L.S. Fifield. 2009. "Natural Fiber Composite Retting, Preform Manufacture and Molding (Project 18988/Agreement 16313)." In 2009 Annual Progress Report: Lightweighting Materials. 8-54 - 8-65. Washington Dc:Department of Energy; Vehicle Technologies Office. PNNL-SA-70189.
  • Yang J., M. Stewart, G.D. Maupin, D.R. Herling, and A. Zelenyuk. 2009. "Single Wall Diesel Particulate Filter (DPF) Filtration Efficiency Studies Using Laboratory Generated Particles." Chemical Engineering Science 64, no. 8:1625-1634. PNNL-SA-61303.

2008

  • Fifield L.S., C. Huang, K.L. Simmons, J.A. Carpenter, and M.T. Smith. 2008. "Evaluation of Composite Natural Fiber/Resin Compatibility." In Annual Progress Report 2008 Vehicle Technologies Program, Lightweigting Materials. 8-75 - 8-81. Washington, District Of Columbia:US Department of Energy, Vehicle Technologies Program. PNNL-18108.
  • Khaleel M.A., X. Sun, and K.L. Simmons. 2008. "Fabrication and Optimization of Properties of Polymer Laminated Nanoreinforced Automobile Glasses: Experiments and Modeling." Journal of Polymer Science. Part A, Polymer chemistry 50, no. 5:568-572. PNNL-SA-54311.
  • Kim J.Y., J.S. Hardy, and K.S. Weil. 2008. "ALUMINUM AIR BRAZING FOR JOINING CERAMICS." In Advances in Ceramic Coatings and Ceramic-Metal Systems: Ceramic Engineering and Science Proceedings, edited by D Zhu and K Plucknett, 26, 374-382. Hoboken, New Jersey:John Wiley & Sons. PNNL-SA-43970. doi:10.1002/9780470291238.ch42
  • Miller S.D., M.K. Murphy, K.L. Simmons, C. Yahnke, C. Yoder, B. Markey, and M. Salasky, et al. 2008. "A HIGH-PRECISION, TISSUE-EQUIVALENT DOSIMETER FOR NUCLEAR ACCIDENT AND RADIATION ONCOLOGY APPLICATIONS BASED ON OPTICALLY STIMULATED LUMINESCENCE (OSL) IN AL2O3:C." Radiation Measurements 43, no. 2-6:875-878. PNWD-SA-7895. doi:10.1016/j.radmeas.2007.12.054
  • Ozensoy E., D.R. Herling, and J. Szanyi. 2008. "NOx Reduction on a Transition Metal-free ?-Al2O3 Catalyst Using Dimethylether (DME)." Catalysis Today 136, no. 1-2:46-54. PNNL-SA-56943.
  • Pilli S., K.L. Simmons, J.D. Holbery, and V. Shutthanandan. 2008. "Accelerated Composite Moisture Infusion Test and Characterization." In CompTest 2008: The 4th International Conference on Composites Testing and Model Identification, edited by F Pierron. Amsterdam:Elsevier. PNWD-SA-8161.
  • Tanner J.E., S.D. Miller, M.M. Conrady, K.L. Simmons, and M.R. Tinker. 2008. "Container Verification Using Optically Stimulated Luminescence." In Institute of Nuclear Materials Management 49th Annual Meeting, July 13-17, Nashville, Tennessee, Paper No. 360. Northbrook, Illinois:Institute of Nuclear Materials Management. PNNL-SA-61295.

2007

  • Canfield N.L., J.V. Crum, J. Matyas, A. Bandyopadhyay, K.S. Weil, L.R. Pederson, and J.S. Hardy. 2007. "Sintering of Mixed-Conducting Composites for Hydrogen Membranes From Nanoscale Co-Synthesized Powders." In Processing and manufacturing of advanced materials international conference; THERMEC 2006, Jul 5th, 2006, Vancouver, Canada. Materials Science Forum, 539-543, 1413-1420. Zurich:Trans Tech Publications. PNNL-SA-48245.
  • Hardy J.S., E.C. Thomsen, N.L. Canfield, J.V. Crum, K.S. Weil, and L.R. Pederson. 2007. "Development of Passive Hydrogen Separation Membranes made from Co-Synthesized Nanoscale Cermet Powders." International Journal of Hydrogen Energy 32. PNNL-SA-48968. doi:10.1016/j.ijhydene.2006.08.016
  • Hardy J.S., J.Y. Kim, E.C. Thomsen, and K.S. Weil. 2007. "Improved Wetting of Mixed Ionic/Electronic Conductors Used in Electrochemical Devices with Ternary Reactive Air Braze Filler Metals." Journal of the Electrochemical Society 154, no. 3:P32-P39. PNNL-SA-51501. doi:10.1149/1.2430691
  • Hardy J.S., N.L. Canfield, J.V. Crum, A. Bandyopadhyay, K.S. Weil, and L.R. Pederson. 2007. "Co-synthesis of Mixed Conducting Composites for Hydrogen Separation: Compositional Considerations." In Materials in Clean Power Systems: Applications, Corrosion, and Protection: 2006 TMS Annual Meeting & Exhibition, edited by ZG Yang, KS Weil and MP Brady, 3-14. Warrendale, Pennsylvania:TMS. PNNL-SA-47483.
  • Holbery J., K.L. Simmons, B.N. Nguyen, and M.T. Smith. 2007. "X-ray Computer Tomography and Real Time Ultrasonic Inspection as Process Development Tools for Discontinuous Fiber Composites." In 7th Annual Automotive Composites Conference & Exhibition. Newtown, Connecticut:Society of Plastics Engineers, Automotive & Composites Division. PNNL-SA-54580.
  • Hong S., and D.R. Herling. 2007. "Aluminum Foam-Phase Change Material Composites as Heat Exchangers." In SAE 2007 World Congress & Exhibition, SP-2105, 2007-01-0419. Warrendale, Pennsylvania:Society of Automotive Engineers. PNNL-SA-52080.
  • Hong S., and D.R. Herling. 2007. "EFFECTS OF SURFACE AREA DENSITY OF ALUMINUM FOAMS ON THERMAL CONDUCTIVITY OF ALUMINUM FOAM-PHASE CHANGE MATERIAL COMPOSITES." Advanced Engineering Materials 9, no. 7:554-557. PNNL-SA-53707. doi:10.1002/adem.200700023
  • Jana s., R.S. Mishra, H.N. Chou, and D.R. Herling. 2007. "FRICTION STIR MICROSTRUCTURAL MODIFICATION OF INVESTMENT CAST F357." In Friction Stir Welding and Processing IV, 439-448. Warrendale, Pa:TMS. PNNL-SA-52708.
  • Kim J.Y., J.S. Hardy, and K.S. Weil. 2007. "Ag-Al based air braze for high temperature electrochemical devices." International Journal of Hydrogen Energy 32, no. 16:3754-3762. PNNL-SA-50903. doi:10.1016/j.ijhydene.2006.08.055
  • Kim J.Y., J.S. Hardy, and K.S. Weil. 2007. "Dual atmosphere tolerance of Ag-CuO based air braze." International Journal of Hydrogen Energy 32, no. 16:3655-3663. PNNL-SA-50902. doi:10.1016/j.ijhydene.2006.08.054
  • Mishra R.S., S. Webb, T.A. Freeney, Y.L. Chen, X. Gayden, G.J. Grant, and D.R. Herling. 2007. "FRICTION STIR SPOT WELDING OF 6016 ALUMINUM ALLOY." In Friction Stir Welding and Processing IV, 341-348. Warrendale, Pa:TMS. PNNL-SA-52682.
  • Nguyen B.N., K.L. Simmons, K.I. Johnson, and J. Holbery. 2007. "The Effect of Fiber Orientation on the Elastic Properties of Discontinuous Fiber Composites." In Proceedings of the American Society for Composites—Twenty-Second Technical Conference, 30-207. Lancaster, Pennsylvania:DEStech Publications. PNWD-SA-7880.
  • Weil K.S., J.S. Hardy, and J.Y. Kim. 2007. "A New Technique for Joining Ceramic and Metal Components in High Temperature Electrochemical Devices." Journal of Advanced Materials. PNNL-SA-39894.

2006

  • Chou Y.S., J.W. Stevenson, J.S. Hardy, and P. Singh. 2006. "Material Degradation During Isothermal Ageing and Thermal Cycling of Hybrid Mica Seals under Solid Oxide Fuel Cell Exposure Conditions." Journal of Power Sources 157, no. 1:260-270. PNNL-SA-44932. doi:10.1016/j.jpowsour.2005.07.027
  • Chou Y.S., J.W. Stevenson, J.S. Hardy, and P. Singh. 2006. "Material Degradation during Isothermal Aging and Thermal Cycling of Hybrid Mica Seal with Ag Interlayer under SOFC Exposure Conditions." Journal of the Electrochemical Society 153, no. 8:A1591-A1598. PNNL-SA-47857.
  • Darsell J.T., J.S. Hardy, J.Y. Kim, and K.S. Weil. 2006. "Investigation of Pd-Modified Ag-CuO Air Braze Filler Metals." In Brazing and Soldering: Proceedings of the 3rd International Brazing and Soldering Conference, April 23-26, 2006, San Antonio, Texas, edited by JJ Stephens and KS Weil, 167-175. Materials Park, Ohio:ASM International. PNNL-SA-47942.
  • Grant G.J., D.R. Herling, W.J. Arbegast, C.D. Allen, and C.M. Degen. 2006. "Superplastic Forming of Aluminum Multisheet Structures Fabricated Using Friction Stir Welding and Refill Friction Stir Spot Welding." In 6th International Symposium on Friction Stir Welding, October 10-13, 2006 Saint-Sauveur, Canada, 52. Cambridge:TWI Limited. PNNL-SA-53238.
  • Hardy J.S., and K.S. Weil. 2006. "Development of High-Temperature Air Braze Filler Metals for Use in Two-Step Joining and Sealing Processes." Welding Journal 87, no. 8:195-s - 201-s. PNNL-SA-52601.
  • Hong S., and D.R. Herling. 2006. "Open-Cell Aluminum Foams Filled With Phase Change Materials as Compact Heat Sinks." Scripta Materialia 55, no. 10:887-890. PNNL-SA-50793.
  • Kim J.Y., J.S. Hardy, and K.S. Weil. 2006. "High temperature tolerance of the silver-copper oxide braze in reducing and oxidizing atmospheres." Journal of Materials Research 21, no. 6:1434-1442. PNNL-SA-46689. doi:10.1557/jmr.2006.0178
  • Weil K.S., E.A. Nyberg, and K.L. Simmons. 2006. "A new binder for powder injection molding titanium and other reactive metals." Journal of Materials Processing Technology 176, no. 1-3:205-209. PNNL-SA-46049.
  • Weil K.S., E.A. Nyberg, and K.L. Simmons. 2006. "A New Binder for Powder Injection Molding Titanium and Other Reactive Metals." Journal of Materials Processing Technology 176, no. 1-3:205-209. PNWD-SA-6658. doi:10.1016/j.jmatprotec.2006.03.154
  • Weil K.S., J.S. Hardy, and B.J. Koeppel. 2006. "New sealing concept for planar solid oxide fuel cells." Journal of Materials Engineering and Performance 15, no. 4:427-432. PNNL-SA-49419.
  • Weil K.S., J.S. Hardy, and B.J. Koeppel. 2006. "New Sealing Concept for Planar Solid Oxide Fuel Cells." Journal of Materials Engineering and Performance 15, no. 4:427-432. PNNL-SA-50955.
  • Weil K.S., J.S. Hardy, J.P. Rice, and J.Y. Kim. 2006. "Brazing as a Means of Sealing Ceramic Membranes for Use in Advanced Coal Gasification Processes." Fuel 85, no. 2:156-162. PNNL-SA-42742. doi:10.1016/j.fuel.2005.07.023
  • Weil K.S., J.S. Hardy, J.P. Rice, and J.Y. Kim. 2006. "Brazing as a Means of Sealing Ceramic Membranes for use in Advanced Coal Gasification Processes." Fuel 85, no. 2:156-162. PNNL-SA-42914.
  • Weil K.S., J.Y. Kim, J.S. Hardy, and J.T. Darsell. 2006. "Improved Wetting Characteristics in TiO2–Modified Ag-CuO Air Braze Filler Metals." In Brazing and Soldering 2006: Proceedings of the 3rd International Brazing and Soldering Conference, April 23-26, 2006, San Antonio, Texas, edited by JJStephens and KS Weil, 120-124. Materials Park, Ohio:ASM International. PNNL-SA-47943.
  • Weil K.S., J.Y. Kim, J.S. Hardy, and J.T. Darsell. 2006. "Improved Wetting Characteristics in TiO2–Modified Ag-CuO Air Braze Filler Metals." In Proceedings of the 3rd International Conference on Brazing and Soldering, edited by JJ Stephens and KS Weil, 120-124. Materials Park, Ohio:ASM International. PNNL-SA-47911.
  • Weil K.S., J.Y. Kim, J.S. Hardy, and J.T. Darsell. 2006. "Investigation of Pd-Modified Ag-CuO Air Braze Filler Metals." In Proceedings of the 3rd Internation Conference on Brazing and Soldering, edited by JJ Stephens and KS Weil, 167-175. Materials Park, Ohio:ASM International. PNNL-SA-47912.
  • Weil K.S., J.Y. Kim, J.S. Hardy, and J.T. Darsell. 2006. "The Effect of TiO2 on the Wetting Behavior of Silver-copper Oxide Braze Filler Metals." Scripta Materialia 54, no. 6:1071-1075. PNNL-SA-46329.

2005

  • Coffey G.W., J.S. Hardy, O.A. Marina, L.R. Pederson, P.C. Rieke, and E.C. Thomsen. 2005. "Copper Doped Lanthanum Strontium Ferrite for Reduced Temperature Solid Oxide Fuel Cells." In Fourteenth International Conference on Solid State Ionics, Jun 22-27 2003, Monterey, CA., USA. Published in Solid State Ionics, 175, 73-78. Amsterdam:Elsevier. PNNL-SA-44931.
  • Darsell J.T., J.S. Hardy, J.Y. Kim, and K.S. Weil. 2005. "Microstructure, Melting and Wetting Properties of Pd-Ag-CuO Air Braze on Alumina." In Surfaces, Interfaces, and the Science of Ceramic Joining: Proceedings of the 106th Annual Meeting of the American Ceramic Society. Ceramic Transactions, edited by KS Weil, IE Reimanis and CA Lewisohn, 158, 173-182. Westerville, Ohio:American Ceramic Society. PNNL-SA-41074.
  • Fifield L.S., K.M. Denslow, A. Gutowska, K.L. Simmons, and J. Holbery. 2005. "ROLE OF FIBER MODIFICATION IN NATURAL FIBER COMPOSITE PROCESSING." In International SAMPE Technical Conference: Materials and Processing Technologies for Revolutionary Applications. Covina, California:Society for the Advancement of Material and Process Engineering. PNNL-SA-53296.
  • Hardy J.S., K.S. Weil, J.Y. Kim, and J.T. Darsell. 2005. "Pd-modified Reactive Air Braze for Increased Melting Temperature." In Surfaces, Interfaces, and the Science of Ceramic Joining (Ceramic Transactions Vol. 158), 147-154. Westerville:American Ceramic Society. PNNL-SA-41212.
  • Hardy J.S., K.S. Weil, J.Y. Kim, E.C. Thomsen, and J.T. Darsell. 2005. "TiO2-modified Ag-CuO Reactive Air Brazes for Improved Wettability on Mixed Ionic/Electronic Conductors." In Surfaces, Interfaces, and the Science of Ceramic Joining Published in CERAMIC TRANSACTIONS, 158, 165-171. Westerville:American Ceramic Society. PNNL-SA-41237.
  • Howard S.M., B.K. Jasthi, W.J. Arbegast, G.J. Grant, S.K. Koduri, D.R. Herling, and D.S. Gelles. 2005. "Friction Stir Welding Of Ma957 Oxide Dispersion Strengthened Ferritic Steel." In Fusion Materials Semi-Annual Report for the period ending December 31, 2004, DOE/ER-0313/37. 55-60. Oak Ridge, Tennessee:Oak Ridge National Laboratory. PNNL-SA-44740.
  • Johanson R.E., and K.L. Simmons. 2005. "Causal Analysis for Sodium Hydroxide (NaOH) Spray from Peristaltic Pump Tube Failure." Journal of Failure Analysis and Prevention 5, no. 4:62-66. PNNL-SA-44990.
  • Kim J.Y., J.S. Hardy, and K.S. Weil. 2005. "Effects of CuO Content on the Wetting Behavior and Mechanical Properties of a Ag-CuO Braze for Ceramic Joining." Journal of the American Ceramic Society 88, no. 9:2521-2527. PNNL-SA-39895.
  • Kim J.Y., J.S. Hardy, and K.S. Weil. 2005. "Novel Metal-Ceramic Joining for Planar SOFCs." Journal of the Electrochemical Society 152, no. 6:J52-J58. PNNL-SA-43098.
  • Kim J.Y., J.S. Hardy, and K.S. Weil. 2005. "Silver-Copper Oxide Based Reactive Air Braze (RAB) for Joining Yttria-Stabilized Zirconia." Journal of Materials Research 20, no. 3:636-643. PNNL-SA-42714.
  • Kim J.Y., K.S. Weil, and J.S. Hardy. 2005. "Reactive Air Brazing for High-Temperature Electrochemical Applications." In ASM Conference Proceedings: Joining of Advanced and Specialty Materials VII - Proceedings from Materials Solutions 2004 on Joining of Advanced and Specialty Materials, Oct 18 - 20 2004, Columbus, OH, United States, 8-17. Materials Park, Ohio:ASM International. PNNL-SA-42505.
  • Kim J.Y., K.S. Weil, and J.S. Hardy. 2005. "The Effect of High Temperature Exposure in Reducing or Oxidizing Atmosphere on Ceramic Joints Brazed with Silver-Copper Oxide." In Proceedings of the Materials Science and Technology 2005 (MS&T'05) Conference, Pittsburgh, PA, September 25-28, 2005, 3, 53-60. Warrendale, Pennsylvania:Association for Iron and Steel Technology. PNNL-SA-45922.
  • Kim J.Y., K.S. Weil, and J.S. Hardy. 2005. "Wetting and Mechanical Characteristics of the Reactive Air Braze for Yttria-Stabilized Zirconia (YSZ) Joining." In Surfaces, Interfaces, and the Science of Ceramic Joining, held 2004 Published in Ceramic Transactions, 158, 101-110. Westerville:American Ceramic Society. PNNL-SA-42507.
  • Lamb M.C., S.J. Camardello, A. Meier, K.S. Weil, and J.S. Hardy. 2005. "BRAZING OF POROUS ALUMINA TO MONOLITHIC ALUMINA WITH Ag-CuO and Ag-V2O5 ALLOYS." In Proceedings of the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida. Ceramic Engineering and Science Proceedings., 26, 391-398. Westerville, Ohio:American Ceramic Society. PNNL-SA-45282.
  • Nyberg E., M.R. Miller, K. Simmons, and K.S. Weil. 2005. "Manufacturers 'need better quality titanium PM powders'." Metal Powder Report 60, no. 10:8-13. PNWD-SA-7490. doi:10.1016/S0026-0657(05)70496-3
  • Nyberg E.A., K.L. Simmons, and K.S. Weil. 2005. "A Novel Method of Injection Molding Titanium Components." In Global Innovations in Materials Processing & Manufacturing; Trends in Materials and Manufacturing Technologies for Transportation Industries and Powder Metallurgy Research and Development in the Transportation Industry. 6th MPMD Global Innovations Symposium : San Francisco, Calif., edited by Thomas R. Bieler, 311-320. Warrendale, Pa:Minerals, Metals and Materials Society. PNWD-SA-6970.
  • Nyberg E.A., M.R. Miller, K.L. Simmons, and K.S. Weil. 2005. "Microstructure and Mechanical Properties of Titanium Components Fabricated by a New Powder Injection Molding Technique." Materials Science and Engineering. C. Biomimetic Materials, Sensors and Systems 25, no. 3:336-342. PNWD-SA-6657.
  • Nyberg E.A., M.R. Miller, K.L. Simmons, and K.S. Weil. 2005. "Microstructure and Mechanical Properties of Titanium Components Fabricated by a New Powder Injection Molding Technique." Materials Science and Engineering. C. Biomimetic Materials, Sensors and Systems 25, no. 3:336-342. PNWD-SA-7488.
  • Simmons K.L., E.A. Nyberg, K.S. Weil, and M.R. Miller. 2005. "In-situ Formation of Ti Alloys via Powder Injection Molding." In Medical Device Materials II: Proceedings from the Materials & Processes for Medical Devices Conference 2004, August 25–27, 2004, St. Paul, Minnesota, edited by Mike Helmus & Dana Medlin, 225-228. Materials Park, Ohio:ASM International. PNWD-SA-6632.
  • Simmons K.L., E.A. Nyberg, K.S. Weil, and M.R. Miller. 2005. "Powder Injection Molding of Titanium Components." In Medical Device Materials II: Proceedings from the Materials & Processes for Medical Devices Conference 2004, August 25–27, 2004, St. Paul, Minnesota, edited by Mike Helmus & Dana Medlin, 211-216. Materials Park, Ohio:ASM International. PNWD-SA-6628.
  • Simmons K.L., G.G. Jones, S.P. Walsh, and G.M. Wood. 2005. "High Performance Laminates Using Blended Urethane Resin Chemistry." In Composites 2004 Convention and Trade Show, American Composites Manufacturers Association. Arlington, Virginia:American Compositites Manufacturers Association. PNNL-SA-44334.
  • Sun X., K.L. Simmons, and M.A. Khaleel. 2005. Characterization of Sound Transmission Loss of Laminated Glass with Analytical and Experimental Approaches. PNNL-15517. Richland, WA: Pacific Northwest National Laboratory. Characterization of Sound Transmission Loss of Laminated Glass with Analytical and Experimental Approaches
  • Weil K.S., and J.S. Hardy. 2005. "A model cerium oxide matrix composite reinforced with a homogeneous dispersion of silver particulate - prepared using the glycine-nitrate process." In Advances in Ceramic Matrix Composites X, Proceedings of the 106th Annual Meeting of the American Ceramic Society, April 18-21, 2004, Indianapolis, Indiana. Ceramic Transactions, edited by JP Singh, NP Bansal and WM Kriven, 165, 23-30. Westerville, Ohio:American Ceramic Society. PNNL-SA-44929.
  • Weil K.S., and J.S. Hardy. 2005. "USE OF COMBUSTION SYNTHESIS IN PREPARING CERAMIC-MATRIX AND METAL-MATRIX COMPOSITE POWDERS." In Trends in Materials and Manufacturing Technologies for Transportation Industries and Powder Metallurgy Research and Development in the Transportation Industry, edited by T.R. Bieler, 341-348. Warrendale, Pennsylvania:Minerals, Metals & Materials Soc. PNNL-SA-42741.
  • Weil K.S., B.J. Koeppel, and J.S. Hardy. 2005. "A New Sealing Concept for Planar Solid Oxide Fuel Cells." In Joining of Advanced and Specialty Materials VII: Proceedings from Materials Solutions October 18–20, 2004, Columbus, Ohio, 148-155. Materials Park, Ohio:ASM International. PNNL-SA-43095.
  • Weil K.S., C.A. Coyle, J.S. Hardy, G. Xia, and J.Y. Kim. 2005. "NEW PLANAR SOFC SEALING TECHNIQUES FOR POTENTIAL TRANSPORTATION APPLICATIONS." In Proceedings of SOFC IX, edited by SC Singhal and J Mizusaki, 2, 1957-1966. Pennington, New Jersey:Electrochemical Society. PNNL-SA-45924.
  • Weil K.S., C.A. Coyle, J.S. Hardy, J.Y. Kim, and G. Xia. 2005. "ALTERNATIVE METHODS OF SEALING PLANAR SOLID OXIDE FUEL CELLS." In Developments in Solid Oxide Fuel Cells and Lithium Ion Batteries, held 2004 Published in Ceramic Transactions, 161, 79-88. Westerville:American Ceramic Society. PNNL-SA-41564.
  • Weil K.S., C.A. Coyle, J.T. Darsell, G. Xia, and J.S. Hardy. 2005. "Effects of Thermal Cycling and Thermal Aging on the Hermeticity and Strength of Silver-Copper Oxide Air-Brazed Seals." Journal of Power Sources 152. PNNL-SA-45923.
  • Weil K.S., E.A. Nyberg, and K.L. Simmons. 2005. "Use of a Naphthalene-Based Binder in Injection Molding Net-Shape Titanium Components of Controlled Porosity." Materials Transactions 46, no. 7:1525-1531. PNNL-SA-44449.
  • Weil K.S., J.E. Deibler, J.S. Hardy, D. Kim, G. Xia, and C.A. Coyle. 2005. "AN ENGINEERING TEST USEFUL IN DEVELOPING GLASS SEALS FOR PLANAR SOLID OXIDE FUEL CELLS." In Surfaces, Interfaces, and the Science of Ceramic Joining, held 2004 Published in Ceramic Transactions, 158, 73-80. Westerville:American Ceramic Society. PNWD-SA-6409.
  • Weil K.S., J.S. Hardy, G. Xia, and C.A. Coyle. 2005. "USE OF RUPTURE STRENGTH TESTING IN EXAMINING THE THERMAL CYCLE BEHAVIOR OF VARIOUS TYPES OF PLANAR SOLID OXIDE FUEL CELL SEALS." In Mechanical Properties and Performance of Engineering Ceramics and Composites. A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida: Ceramic Engineering and Science Proceedings, edited by E Lara-Curzio, 26, 149-155. Westerville, Ohio:American Ceramic Society. PNWD-SA-6973. doi:10.1002/9780470291221.ch19
  • Weil K.S., J.Y. Kim, and J.S. Hardy. 2005. "Interfacial Analysis of (La0.6Sr0.4)(Co0.2Fe0.8)O3-d Substrates Wetted by Ag-CuO." Journal of Materials Science 40, no. 9-10:2341-2348. PNNL-SA-41576. doi:10.1007/s10853-005-1956-1
  • Weil K.S., J.Y. Kim, and J.S. Hardy. 2005. "Reactive air brazing: A novel method of sealing SOFCs and other solid-state electrochemical devices." Electrochemical and Solid-State Letters 8, no. 2:A133-136. PNNL-SA-42748. doi:10.1149/1.1850391
  • Zink N.M., A. Meier, K.S. Weil, and J.S. Hardy. 2005. "REACTIVE AIR BRAZING OF LSCoF AND ALUMINA WITH Ag-V2O5 ALLOYS FOR SOFC APPLICATIONS." In Proceedings of the 29th International Conference on Advanced Ceramics and Composites, January 23-28, 2005, Cocoa Beach, Florida. Ceramic Engineering and Science Proceedings, 26, 341-348. Westerville, Ohio:American Ceramic Society. PNNL-SA-45286.

2004

  • Coffey G.W., J.S. Hardy, O.A. Marina, L.R. Pederson, P.C. Rieke, and E.C. Thomsen. 2004. "Copper Doped Lanthanum Strontium Ferrite for Reduced Temperature Solid Oxide Fuel Cells." Solid State Ionics 175, no. 1-4:73-78. PNNL-SA-46526. doi:10.1016/j.ssi.2004.09.015
  • Darsell J.T., J.S. Hardy, J.Y. Kim, and K.S. Weil. 2004. "AN INVESTIGATION OF WETTABILITY, AND MICROSTRUCTURE IN ALUMINA JOINTS BRAZED WITH Ag-CuO-TiO2." In Ceramic Transactions: Surfaces, Interfaces, and the Science of Ceramic Joining: Proceedings of the 106th Annual Meeting of the American Ceramic Society, edited by KS Weil, IE Reimanis and CA Lewinsohn, 158, 65-72. Westerville, Ohio:American Ceramic Society. PNNL-SA-41236.
  • Darsell J.T., J.S. Hardy, J.Y. Kim, and K.S. Weil. 2004. "Microstructure, Melting and Wetting Properties of Pd-Ag-CuO Air Braze on Alumina." In Surfaces, Interfaces and Science of Ceramic Joining: Proceedings of the 106th Annual Meeting of The American Ceramic Society, Indianapolis, Indiana, USA 2004, Ceramic Transactions, edited by KS Weil, IE Reimanis and CA Lewinshohn, 158, 173-182. Westerville, Ohio:American Ceramic Society. PNNL-SA-41213.
  • Hardy J.S., J.T. Darsell, C.A. Coyle, J.C. Birnbaum, and K.S. Weil. 2004. "Thermal Cyclability of Reactive Air Braze Seals in Anode Supported Solid Oxide Fuel Cells." In Joining of Advanced and Specialty Materials VI - Proceedings from Materials Solutions 2003 on Joining of Advanced and Specialty Materials, Oct. 13-15 2003, Pittsburgh, PA, United States, 51-58. Materials Park, Ohio:ASM International. PNNL-SA-39770.
  • Hardy J.S., J.Y. Kim, and K.S. Weil. 2004. "Joining Mixed Conducting Oxides Using an Air-Fired Electrically Conductive Braze." Journal of the Electrochemical Society 151, no. 8:J48-J49. PNNL-SA-39840.
  • Herling D.R., and W. Hunt. 2004. "Low Cost Cast Aluminum Metal Matrix Composites Have Arrived." In Affordable Metal Matrix Composites for High Performance Applications II; Chicago, 9-12 November 2003., 13-23. Warrendale, Pennsylvania:Minerals, Metals & Materials Society. PNNL-SA-39566.
  • Hunt W., and D.R. Herling. 2004. "Aluminum Metal Matrix Composites." Advanced Materials & Processes 162, no. 2:39-44. PNNL-SA-39568.
  • Hunt W., and D.R. Herling. 2004. "Metal Matrix Composites." Advanced Materials & Processes 162, no. 2:39-42. PNNL-SA-40373.
  • Kim J.Y., J.S. Hardy, and K.S. Weil. 2004. "Use of Aluminum in Air-Brazing Aluminum Oxide." Journal of Materials Research 19, no. 6:1717-1722. PNNL-SA-39903.
  • Muntean G.G., D.R. Rector, D.R. Herling, M.A. Khaleel, and D.L. Lessor. 2004. "Lattice-Boltzmann Diesel Particulate Filter Sub-Grid Modeling - A Progress Report." In Diesel Emission Measurement and Modeling : SAE 2003 World Congress & Exhibition, March 2003, Detroit, MI, USA., SP-1755, 2003-01-0835. Warrendale, Pennsylvania:SAE International. PNNL-SA-37791.
  • Sun X., E.V. Stephens, and D.R. Herling. 2004. "Static and Fatigue Strength Evaluations for Bolted Composite/Steel Joints for Heavy Vehicle Chassis Components." In 4th Annual SPE Automotive Composites Conference, Commercial Transport Session, Paper No. 3, 1-14. Brookfield, Connecticut:Society of Plastics Engineers. PNNL-SA-42134.
  • Weil K.S., and J.S. Hardy. 2004. "DEVELOPMENT OF A COMPLIANT SEAL FOR USE IN PLANAR SOLID OXIDE FUEL CELLS." In 28th International Conference on Advanced Ceramics and Composites A: Ceramic Engineering and Science Proceedings, edited by E Lara-Curzio and MJ Readey, 25, 321-326. Westerville, Ohio:American Ceramic Society. PNNL-SA-42745. doi:10.1002/9780470291184.ch46
  • Weil K.S., C.A. Coyle, J.S. Hardy, J.Y. Kim, and G. Xia. 2004. "Alternative Planar SOFC Sealing Concepts." Fuel Cells Bulletin 2004, no. 5:11-16. PNNL-SA-41573. doi:10.1016/S1464-2859(04)00188-9
  • Weil K.S., J.E. Deibler, J.S. Hardy, D. Kim, G. Xia, L.A. Chick, and C.A. Coyle. 2004. "Rupture Testing as a Tool for Developing Planar Solid Oxide Fuel Cell Seals." Journal of Materials Engineering and Performance 13, no. 3:316-326. PNNL-SA-40326.
  • Weil K.S., J.S. Hardy, and J.T. Darsell. 2004. "INVESTIGATION OF A NOVEL AIR BRAZING COMPOSITION FOR HIGH-TEMPERATURE, OXIDATION-RESISTANT CERAMIC JOINING." In 28th International Conference on Advanced Ceramics and Composites A: Ceramic Engineering and Science Proceedings, edited by E Lara-Curzio and MJ Readey, 25, 107-112. Westerville, Ohio:American Ceramic Society. PNNL-SA-42747. doi:10.1002/9780470291184.ch14
  • Weil K.S., J.T. Darsell, J.S. Hardy, and J.Y. Kim. 2004. "Advances in Air Brazing for Use in Joining and Sealing High-Temperature Gas Separation Membranes." In Proceedings of the 18th Annual Conference on Fossil Energy Materials, June 2-4, 2004, Knoxville, Tennessee, edited by RR Judkins and LS Mack, ORNL/R04-1203.5. Oak Ridge, Tennessee:Oak Ridge National Laboratory. PNNL-SA-42743.
  • Yang Z., J.S. Hardy, M.S. Walker, G. Xia, S.P. Simner, and J.W. Stevenson. 2004. "Structure and Conductivity of Thermally Grown Scales on Ferritic Fe-Cr-Mn Steel for SOFC Interconnect Applications." Journal of the Electrochemical Society 151. PNNL-SA-39432.

2003

  • Coffey G.W., J.S. Hardy, L.R. Pederson, P.C. Rieke, and E.C. Thomsen. 2003. "Oxygen Reduction Activity of Lanthanum Strontium Nickel Ferrite." Electrochemical and Solid-State Letters 6, no. 6:A121-A124. PNNL-SA-38106.
  • Coffey G.W., J.S. Hardy, L.R. Pederson, P.C. Rieke, E.C. Thomsen, and M.B. Walpole. 2003. "Electrochemical Properties of Lanthanum Strontium Aluminum Ferrites for the Oxygen Reduction Reaction." Solid State Ionics 158, no. 1-2:1-9. PNNL-SA-36085.
  • Conkle H., S.F. Kuczek, S.P. Chauhan, K.L. Simmons, W.D. Samuels, and M. Wyderski. 2003. "Environmentally Friendly, Non-Glycol Type I Aircraft Deicing Fluid." In In-Flight Icing/Ground De-icing International Conference Proceedings, FAA, 2125. New York, New York:Society of Automotive Engineers. PNWD-SA-6013.
  • Herling D.R., and L. Klett. 2003. "Joining Composite Chassis Components on Heavy Trucks." In 3rd Annual SPE Automotive Composites Conference, September 9-10, 2003, Troy, Michigan, 4 pages. Newton, Connecticut:Society of Plastics Engineers. PNNL-SA-39576.
  • Morris M.J., and K.L. Simmons. 2003. "Comparing Surfaces and Engineered Interfaces using Self-Assembled Monolayers (SAMs) and Injected SAMs Silanes." Journal of Undergraduate Research. PNNL-SA-39478.
  • Strachan D.M., H.T. Schaef, M.J. Schweiger, K.L. Simmons, L.J. Woodcock, and M.K. Krouse. 2003. "A versatile and inexpensive XRD sample holder for highly radioactive or hazardous samples." Powder Diffraction 18, no. 1:23-28. PNNL-SA-36294.
  • Weil K.S., and J.S. Hardy. 2003. "Brazing a Mixed Ionic/Electronic Conductor to an Oxidation Resistant Metal." In Advances in Joining of Ceramics: Proceedings of the Joining of Ceramics Symposium: Held at the 104th Annual Meeting of the American Ceramic Society, April 28-May 1, 2002, in St. Louis, Missouri., edited by C A Lewinsohn, M Singh, R Loehman, 138, 185-200. Westerville, Ohio:American Ceramic Society. PNWD-SA-5672.
  • Weil K.S., and J.S. Hardy. 2003. "Electrically Joining Mixed Conducting Oxides for High Temperature Applications." In Proceedings of the International Brazing and Soldering Conference, February 16-19, 2003, San Diego, California. Miami, Florida:American Welding Society. PNNL-SA-39901.
  • Weil K.S., C.A. Coyle, J.Y. Kim, and J.S. Hardy. 2003. "The Effect of Composition on the Wetting Behavior and Joint Strength of the Ag-CuO Reactive Air Braze." In Solid State Ionics-2002: Symposium held December 2-5, 2002, Boston, Massachusetts, U.S.A., edited by Philippe Knauth; Hubert A Gasteiger, 756, 551-556. Warrendale, Pennsylvania:Materials Research Society. PNNL-SA-37659.
  • Weil K.S., J.S. Hardy, and J.Y. Kim. 2003. "Development of a Silver-Copper Oxide Braze for Joining Metallic and Ceramic Components in Electrochemical Devices." In 2nd International Brazing and Soldering Conference, 1.1. Miami, Florida:American Welding Society. PNNL-SA-37202.
  • Weil K.S., J.S. Hardy, and J.Y. Kim. 2003. "Development of a Silver-Copper Oxide Braze for Joining Metallic and Ceramic Components in Electrochemical Devices." In Proceedings of the International Brazing and Soldering 2003 Conference, 1.1. Miami, Florida:American Welding Society. PNNL-SA-39900.
  • Weil K.S., J.S. Hardy, and J.Y. Kim. 2003. "Development of Brazing Technology for Use in High Temperature Gas Separation Equipment." In Proceedings of the 17th Annual Conference on Fossil Energy Materials, April 22-24, 2003, Baltimore, Maryland. Morgantown, West Virginia:National Energy Technology Laboratory. PNNL-SA-39899.
  • Weil K.S., J.S. Hardy, and J.Y. Kim. 2003. "Use of Novel Ceramic-Metal Braze for Joining in High Temperature Electrochemical Devices." In Joining of Advanced and Specialty Materials V Proceedings 2002, edited by Indacochea, J. E., 47-55. Materials Park, Ohio:ASM International. PNNL-SA-37164.

2002

  • Coffey G.W., J.S. Hardy, K.D. Meinhardt, O.A. Marina, and S.P. Simner. 2002. "All-Ceramic SOFC Tolerant to Oxygen, Carbon and Sulfur." In 2002 Fuel Cell Seminar: Fuel Cells - Reliable, Clean Energy for the World, November 19-21, 2002, Palm Springs, California., 295-298. Washington, District Of Columbia:Fuel Cell Seminar. PNNL-SA-39163.
  • Weil K.S., and J.S. Hardy. 2002. "Development of a New Ceramic-to-Metal Brazing Technique for Oxygen Separation/Generation Applications." In Proceedings of the 2002 Fossil Energy Conference, April 22-24, 2002, Baltimore, Maryland. Pittsburgh, Pennsylvania:National Energy Technology Laboratory. PNNL-SA-37773.

2001

  • Grant G.J., D.E. Mccready, D.R. Herling, and M.T. Smith. 2001. "Interfacial Reactions at Elevated Temperatures in New Low-Cost AL/SiC Metal Matrix Composite." In Affordable metal-matrix composites for high performance applications, edited by Ab Pandey, KL Kendig, TJ Watson, 233-250. Warrendale, Pennsylvania:The minerals, metals and materials society. PNNL-SA-35130.
  • Simner S.P., J.S. Hardy, and J.W. Stevenson. 2001. "Sintering and Properties of Mixed Lanthanide Chromites." Journal of the Electrochemical Society 148, no. 4:A351-A360. PNNL-SA-33801.

2000

  • Chou Y.S., J.W. Stevenson, T.R. Armstrong, J.S. Hardy, K. Hasinska, and L.R. Pederson. 2000. "Microstructure and mechanical properties of Sm1-xSrxCo0.2Fe0.8O3." Journal of Materials Research 15, no. 7:1505-1513. PNNL-SA-32329.
  • Herling D.R., and M.T. Smith. 2000. "SUPERPLASTIC MICROSTRUCTURE OF MODIFIED AA-5083 ALUMINUM ALLOY PROCESSED BY EQUAL CHANNEL ANGULAR EXTRUSION." In Ultrafine Grained Materials: Proceedings of a Symposium held during the 2000 TMS Annual Meeting, edited by RS Mishra, 411-420. Warrendale, Pennsylvania:TMS. PNNL-SA-32379.
  • Herling D.R., M.R. Smith, and M.D. Hemingway. 2000. "Cylindrical Corona Reactors for a Plasma Assisted Nitrogen Oxide Emission Reduction Device." In Advanced Propulsion & Emission Technology: Proceedings of the Global Powertrain Congress, edited by D Roessler, 15, 91-102. Warren, Michigan:Global Powertrain Congress, Ltd. PNWD-SA-5048.
  • Herling D.R., M.R. Smith, M.D. Hemingway, D. Goulette, and T.W. Silvis. 2000. "Evaluation of Corona Reactors of Several Geometries for a Plasma Assisted Nitrogen Oxide Emission Reduction Device." In SAE International Fall Fuels & Lubricants Meeting & Exposition, 2000-01-2899. Warrendale, Pennsylvania:Society of Automobile Engineers. PNNL-SA-33505.
  • Herling D.R., M.R. Smith, S. Baskaran, and J. Kupe. 2000. "Application of Non-Thermal Plasma Assisted Catalyst Technology for Diesel Engine Emission Reduction." In Future engines. Future Transportation Technology Conference, Costa Mesa, California, August 21-23, 2000, 61-68. Warrendale, Pennsylvania:Society of Automtove Engineers. PNNL-SA-33276.
  • Lessor D.L., D.R. Herling, A.K. Sharma, and C. Speck. 2000. "Development of a Non-Thermal Plasma Reactor Electrical Model for Optimum NOx Removal Performance." In International Fall Fuels and Lubricants Meeting and Exposition, 7-18. Warrendale, Pennsylvania:Society of Automotive Engineers. PNNL-SA-34058.
  • Samuels W.D., K.L. Simmons, G.E. Fryxell, K.L. Alford, R.S. Brooks, M. Neil, and K.E. Piippo, et al. 2000. "Interfacial Chemical Control for Enhancement of Composite Material Strength." In ICCE/7 Seventh Annual International Conference on Composites Engineering, edited by David Hui, 767-768. New Orleans, Louisiana:International Community for Composites Engineering and College of Engineering, U. of New Orleans. PNNL-SA-33296.
  • Simner S.P., J.S. Hardy, J.W. Stevenson, and T.R. Armstrong. 2000. "Sintering Of Lanthanum Chromite Using Strontium Vanadate." Solid State Ionics 128 (1-4). PNNL-SA-32256.
  • Simner S.P., J.S. Hardy, J.W. Stevenson, and T.R. Armstrong. 2000. "Sintering of Non-Stoichiometric Strontium Doped Lanthanum Chromite." Journal of Materials Science 19, no. 10:863-865. PNNL-SA-30482.
  • Simner S.P., J.W. Stevenson, J.S. Hardy, and L.A. Chick. 2000. "Cost Reduction of Lanthanum Chromite Materials." In 2000 Fuel Cell Seminar, 631-634. Washington, District Of Columbia:Courtesy Associates. PNNL-SA-33985.
  • Simner S.P., J.W. Stevenson, J.S. Hardy, and L.A. Chick. 2000. "Cost Reduction of Lanthanum Chromite Materials." In Fuel cells--powering the 21st Century : 2000 Fuel Cell Seminar, October 30-November 2, 2000, Portland, Oregon, Oregon Convention Center : abstracts, 631-634. Washington, District Of Columbia:Courtesy Associates. PNNL-SA-34229.

1999

  • Armstrong T.R., S.P. Simner, J.S. Hardy, and J.W. Stevenson. 1999. "Optimizing Lanthanum Chromite Interconnects for Solid Oxide Fuel Cells." In 6th International Symposium on Solid Oxide Fuel Cells (SOFC-VI), 99, 706-715. Pennington, New Jersey:The Electrochemical Society, Inc. PNNL-SA-33987.
  • Simner S.P., J.S. Hardy, J.W. Stevenson, and T.R. Armstrong. 1999. "Sintering and Property Characterization of Strontium-Doped Lanthanum Chromite." In Solid Oxide Fuel Cells (SOFC VI). Proceedings of the Sixth International Symposium, Oct. 17-22, 1999, Honolulu, HI, 696-705. Pennington, New Jersey:The Electrochemical Society, Inc. PNNL-SA-33989.
  • Simner S.P., J.S. Hardy, J.W. Stevenson, and T.R. Armstrong. 1999. "Sintering and Property Characterization of Strontium-Doped Lanthanum Chromite." In Solid Oxide Fuel Cells (SOFC VI): Proceedings of the 6th International Conference held in Honolulu, October 1999, edited by SC Singhal, M Dokiya, 696-705. Pennington, New Jersey:Electrochemical Society. PNNL-SA-32428.

About AMM

Related Links

Contact

Additional Information

Contacts


509/375-2878